/bpm-cfg

BPM configuration scripts

Primary LanguageShell

BPM configuration scripts

Instructions

0. Run scripts inside 00-ethswitch-configure to configure the Switch

Before running the scripts be sure to have a USB stick with the file "config-switch-dig" connected in the switch "Aux Port"

./00-ethswitch-configure/ethswitch-configure.sh

For example:

./00-ethswitch-configure/ethswitch-configure.sh

1. Run scripts inside 01-mch-configure to configure the MCH

./01-mch-configure/mch-configure.sh <Connection Type> [<MCH IP> <MCH Password>] <TFTP server address> <Crate Number>

For example, for a serial connection, with TFTP server in 10.0.17.38 and Crate Number 9:

./01-mch-configure/mch-configure.sh serial 10.0.17.38 9

2. Run scripts inside 02-cpu-configure to configure the CPU

./02-cpu-configure/cpu-configure.sh <CPU IP> <Crate Number> <CPU Root password>

For example:

./02-cpu-configure/cpu-configure.sh 10.0.18.55 9 root-pass

3. Run scripts inside 03-mmc-configure to configure the MMCs firmware

./03-mmc-configure/mmc-configure.sh <MCH IP>

For example:

./03-mmc-configure/mmc-configure.sh 10.0.18.60

4. Run scripts inside 04-fpga-configure to configure the FPGAs

./04-fpga-configure/fpga-configure.sh <MCH IP> <Crate Number>

For example:

./04-fpga-configure/fpga-configure.sh 10.0.18.60 9

5. Run script inside 05-cpu-check to check CPU status

./05-cpu-check/cpu-check.sh <CPU IP> <Crate Number> <CPU Root password>

For example, for testing the link of boards in crate 9:

./05-cpu-check/cpu-check.sh 10.0.18.55 9 root-pass

6. Run script inside 06-bpm-test to test BPMs

./06-bpm-test/bpm-tests.sh <Crate Number> <Destination folder for test results>

For example, for testing the bpm in crate 9:

./06-bpm-test/bpm-tests.sh 9 ~/results_test_no_signal