Flexible firmware for Arduino-powered keyboards.
This package contains the "core" of Kaleidoscope and a number of example firmware "Sketches".
If you're just getting started with the Keyboardio Model 01, the introductory docs are here and the source for the basic firmware package is here: https://github.com/keyboardio/Model01-Firmware. It's probably a good idea to start there, learn how to modify your keymap and maybe turn some modules on or off, and then come back to the full repository when you have more complex changes in mind.
Pick a directory to work in, you'll need to clone multiple repositories. We'll assume you picked $HOME/kaleidoscope, if you chose another adapt the commands below accordingly.
Setup the Arduino IDE on your system. Make sure you install at least version 1.6, since older version may not support all required features.
- On Linux, follow the instructions on the wiki.
- On macOS, install using homebrew cask with
brew cask install arduinoor download the application from the official website and move it to your/Applicationsfolder.
# you'll need to know your arduino sketchbook directory
# on macOS the default is
SKETCHBOOK_DIR=$HOME/Documents/Arduino
# on Linux the default is
SKETCHBOOK_DIR=$HOME/Arduino
# go to your kaleidoscope directory
cd $HOME/kaleidoscope
# then clone the hardware definitions
git clone --recursive https://github.com/keyboardio/Kaleidoscope-Bundle-Keyboardio.git
# and make them available to the arduino environment
mkdir -p $SKETCHBOOK_DIR/hardware
ln -s $HOME/kaleidoscope/Kaleidoscope-Bundle-Keyboardio $SKETCHBOOK_DIR/hardware/keyboardio# go to your keyboardio directory
cd $HOME/kaleidoscope/Kaleidoscope-Bundle-Keyboardio/avr/libraries/Model01-Firmware
# and build your firmware!
make<3 jesse
