Message Types
stackmagic opened this issue · 0 comments
stackmagic commented
Hi and Thanks! The Autoconfig works great for the Neo M8N - I couldn't get the switch to UBX working myself. For actual reading, I use https://github.com/bolderflight/UBLOX, though simply for convenience and because I'm fine with 1Hz updates.
About the autoconfig:
I figured I'd document the messages you're enabling after switching to UBX. Maybe the spec I used is faulty and that may be the reason why I couldn't get it to work - couldn't find all the messages either. I used this: https://www.u-blox.com/sites/default/files/products/documents/u-blox8-M8_ReceiverDescrProtSpec_%28UBX-13003221%29_Public.pdf
{0xF0, 0x0A}, // DTM - Datum Reference
{0xF0, 0x09}, // GBS - GNSS Satellite Fault Detection
{0xF0, 0x00}, // GGA - Global positioning system fix data
{0xF0, 0x01}, // GLL - Latitude and longitude, with time of position fix and status
{0xF0, 0x0D}, // GNS - GNSS fix data
{0xF0, 0x06}, // GRS - GNSS Range Residuals
{0xF0, 0x02}, // GSA - GNSS DOP and Active Satellites
{0xF0, 0x07}, // GST - GNSS Pseudo Range Error Statistics
{0xF0, 0x03}, // GSV - GNSS Satellites in View
{0xF0, 0x04}, // RMC - Recommended Minimum data
{0xF0, 0x0E}, // ???
{0xF0, 0x0F}, // VLW - Dual ground/water distance
{0xF0, 0x05}, // VTG - Course over ground and Ground speed
{0xF0, 0x08}, // ZDA - Time and Date
{0xF1, 0x00}, // POSITION - Lat/Long Position Data
{0xF1, 0x01}, // ???
{0xF1, 0x03}, // SVSTATUS - Satellite Status
{0xF1, 0x04}, // TIME - Time of Day and Clock Information
{0xF1, 0x05}, // ???
{0xF1, 0x06}, // ???
That's all - thanks again!