直到当前最新版本下，设备主机信息依然识别失败，提示为mobile_v44.sh存在错误
Closed this issue · 11 comments
设备主机信息识别错误，提示为mobile_v44.sh存在错误
期望结果
截图
设备详细信息
- 系统： Flyme 10.24.4.7Daily / Android 14
- App版本： 1.0.859
- 主机系统为ArchLinux
Bot detected the issue body's language is not English, translate it automatically. 👯👭🏻🧑🤝🧑👫🧑🏿🤝🧑🏻👩🏾🤝👨🏿👬🏿
Title: Until the latest version,
麻烦粘贴下 hostname 和 cat /etc/hostname 的输出，如果包含隐私请使用*替代
Bot detected the issue body's language is not English, translate it automatically. 👯👭🏻🧑🤝🧑👫🧑🏿🤝🧑🏻👩🏾🤝👨🏿👬🏿
Please paste the output of hostname and cat /etc/hostname. If privacy is included, please use * instead.
Bot detected the issue body's language is not English, translate it automatically. 👯👭🏻🧑🤝🧑👫🧑🏿🤝🧑🏻👩🏾🤝👨🏿👬🏿
Please paste the output of
hostnameandcat /etc/hostname. If privacy is included, please use * instead.
cat: can't open '/etc/hostname': No such file or directory
@lollipopkit Please borrow the building again and report the problem.
- openwrt cannot view files via sftp
- iOS cannot keep the screen on, and the screen will go off after a while.
- Can the home page status card display uplink and downlink speeds, uplink and downlink traffic, read and write speeds, and read and write volume at the same time? It would be very uncomfortable to switch back and forth manually.
Bot detected the issue body's language is not English, translate it automatically. 👯👭🏻🧑🤝🧑👫🧑🏿🤝🧑🏻👩🏾🤝👨🏿👬🏿
There are also upstream and downstream speeds and reading and writing speeds. The font is too small and the color is too light, and the readability is very poor.
麻烦粘贴下
hostname和cat /etc/hostname的输出，如果包含隐私请使用*替代cat: can't open '/etc/hostname': No such file or directory@lollipopkit 再借楼反馈一下问题，
- openwrt不能sftp查看文件
- ios不能长亮屏幕，过一会就息屏了
- 首页状态卡片，能不能同时显示上下行速度和上下行流量，读写速度和读写量，手动切来切去很难受
- wrt可能没有安装sftp，所以没法用
- TODO
- 流量视图可以在设置切换
Bot detected the issue body's language is not English, translate it automatically. 👯👭🏻🧑🤝🧑👫🧑🏿🤝🧑🏻👩🏾🤝👨🏿👬🏿
Please paste the output of
hostnameandcat /etc/hostname. If it contains privacy, please use * instead.cat: can't open '/etc/hostname': No such file or directory@lollipopkit Please borrow the building again and report the problem.
- openwrt cannot view files via sftp
- iOS cannot keep the screen on, and the screen will turn off after a while.
- Can the home page status card display uplink and downlink speeds, uplink and downlink traffic, read and write speeds, and read and write volume at the same time? It would be very uncomfortable to switch back and forth manually.
- wrt may not have sftp installed, so it cannot be used
- TODO
- Traffic view can be switched in settings
Bot detected the issue body's language is not English, translate it automatically. 👯👭🏻🧑🤝🧑👫🧑🏿🤝🧑🏻👩🏾🤝👨🏿👬🏿
- Traffic view can be switched in settings
It’s not that you need to switch functions, you need to view these data at the same time.
之前就是因为屏幕放不下，所以才点击切换。
archlinux可以hostname获取主机名吗？
Bot detected the issue body's language is not English, translate it automatically. 👯👭🏻🧑🤝🧑👫🧑🏿🤝🧑🏻👩🏾🤝👨🏿👬🏿
Previously, it was because the screen could not fit, so I clicked to switch.
Can archlinux get the hostname with hostname?
Bot detected the issue body's language is not English, translate it automatically. 👯👭🏻🧑🤝🧑👫🧑🏿🤝🧑🏻👩🏾🤝👨🏿👬🏿
Previously, it was because the screen could not fit, so I clicked to switch.
4 rows are enough to display these data at the same time