loopy750/SRT-Stats-Monitor

SRT Monitor won't change to BRB fail scene

GORDIE1021 opened this issue · 1 comments

GORDIE1021 commented

I just updated to OBS Studio 29. Now, SRT Monitor won't change to BRB fail scene. I switched to older version of OBS, but same problem. Reinstalled OBS Studio 29 since older version had same problem. When SRT Monitor connects, scene switches to the scene intro/ scene OK as usual, but when source fails, SRT monitor stays there with black screen.

loopy750 commented

Without knowing your current or previous configuration, it is too hard for me to say what could be causing this. OBS Studio 29 has worked fine for me and others.

So I'd recommend start from the beginning with the quick start guide: https://github.com/loopy750/SRT-Stats-Monitor/blob/main/modifications/resources/quick_start_guide.md

or at the very least, importing this configuration and see if that works successfully: https://raw.githubusercontent.com/loopy750/SRT-Stats-Monitor/main/modifications/resources/Loopy_SRT_Monitor.json