TTGO in boot loop
uhrbach opened this issue · 3 comments
Hello,
after flashing the TTGO go in a boot loop.....
Terminal output:
rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0018,len:4
load:0x3fff001c,len:1044
load:0x40078000,len:8896
load:0x40080400,len:5828
entry 0x400806ac
I src\LoRa_APRS_Tracker.cpp 79 : LoRa APRS Tracker by OE5BPA (Peter Buchegger)
I src\LoRa_APRS_Tracker.cpp 80 : Version: 22.19.0
E src\configuration.cpp 31 : Failed to read file, using default configuration.
Guru Meditation Error: Core 1 panic'ed (LoadProhibited). Exception was unhandled.
Core 1 register dump:
PC : 0x40001277 PS : 0x00060130 A0 : 0x800da34e A1 : 0x3ffca1f0
A2 : 0x00000000 A3 : 0x3f401713 A4 : 0x3ffc1ccc A5 : 0x3ffc1ce0
A6 : 0x400ea600 A7 : 0x00000000 A8 : 0x00000000 A9 : 0x3ffca030
A10 : 0x3ffca890 A11 : 0x40087f20 A12 : 0x3f40196a A13 : 0x0000001f
A14 : 0x00000001 A15 : 0xff000000 SAR : 0x00000004 EXCCAUSE: 0x0000001c
EXCVADDR: 0x00000000 LBEG : 0x4000c2e0 LEND : 0x4000c2f6 LCOUNT : 0x00000000
Backtrace: 0x40001277:0x3ffca1f0 0x400da34b:0x3ffca200 0x400d1f21:0x3ffca220 0x400d20f2:0x3ffca2c0 0x400dc4c7:0x3ffca330 0x400905f5:0x3ffca350
#0 0x40001277:0x3ffca1f0 in ?? ??:0
#1 0x400da34b:0x3ffca200 in String::equals(char const*) const at C:\Users\olaf.platformio\packages\framework-arduinoespressif32\cores\esp32/WString.cpp:857
#2 0x400d1f21:0x3ffca220 in String::operator==(char const*) const at C:\Users\olaf.platformio\packages\framework-arduinoespressif32\cores\esp32/WString.h:191
(inlined by) load_config() at src/LoRa_APRS_Tracker.cpp:354
#3 0x400d20f2:0x3ffca2c0 in setup() at src/LoRa_APRS_Tracker.cpp:84 (discriminator 8)
#4 0x400dc4c7:0x3ffca330 in loopTask(void*) at C:\Users\olaf.platformio\packages\framework-arduinoespressif32\cores\esp32/main.cpp:14
#5 0x400905f5:0x3ffca350 in vPortTaskWrapper at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/freertos/port.c:355 (discriminator 1)
Rebooting...
ets Jul 29 2019 12:21:46
have you uploaded the filesystem image?
SURE :)
Auto-detected: /dev/cu.wchusbserial54260070271
Uploading .pio/build/ttgo-t-beam-v1/firmware.bin
esptool.py v3.0
Serial port /dev/cu.wchusbserial54260070271
Connecting....
Chip is ESP32-D0WDQ6-V3 (revision 3)
Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None
Crystal is 40MHz
MAC: 30:c6:f7:1f:10:08
Uploading stub...
.
.
.
.
writing at 0x00088000... (100 %)
Wrote 862048 bytes (507861 compressed) at 0x00010000 in 11.8 seconds (effective 584.9 kbit/s)...
Hash of data verified.
Leaving...
Hard resetting via RTS pin...
=========================================== [SUCCESS] Took 19.35 seconds ===========================================
Environment Status Duration
ttgo-t-beam-v1 SUCCESS 00:00:19.350
That is the firmware file not the filesystem.
Uploading .pio/build/ttgo-t-beam-v1/firmware.bin
you need to upload the filesystem image
Uploading .pio/build/ttgo-t-beam-v1/spiffs.bin
Try:
PlatformIO -> ttgo-t-beam-v1 -> Platform -> Upload Filesystem Image