Pinned Repositories
8x8_RGB_LED_Matrix_Controller
LAYOUT FILES: 8x8-RGB-LED-Matrix controller using 4x 74HC595 shift registers. CPU: ATmega168/328. Arduino 'compatible'. Runs with code from 'V3_x_boards_test' repo. KICAD and Gerber files.
ATtiny_projects
CODE: various things for ATtiny micro-controllers.
AVR-ISP_pogo-plug_1.27mm
LAYOUT FILES: AVR-ISP adapter: 6pin (2.54mm) --> 6pin pogo-pins (1.27mm).
KiCad-Logos
Logos and other potentially useful graphical elements for KiCad
KiCad-Stuff
Various things to make working with KiCad easier. Most likely Linux centric.
MBI5030_demo
CODE: Arduino-ized code to talk to and configure the Macroblock MBI5030 PWM LED driver.
Panelization.pretty
LAYOUT FILES: KiCad footprints useful for PCB panelization (mouse-bites...).
WS2812B.pretty
LAYOUT FILES: KiCad footprints for WS2812B LEDs (and pin-compatible ones).
Youyue-858D-plus
CODE: Custom firmware for Youyue 858D+ (ATmega168/328P)
Youyue-858D-plus-MCU-adapter
LAYOUT FILES: ATmega168/328 adapter board for the Youyue 858D+.
madworm's Repositories
madworm/ledcandle
Flickering LED Candle Firmware
madworm/IR_raw_receiver
LAYOUT FILES: 38kHz IR receiver using ATtiny85 + TSOP38238
madworm/MBI5168_DIP_breakout
LAYOUT FILES: Simple breakout board for the MBI5168 constant current LED driver. KICAD and Gerber files.
madworm/MBI5168_SMD_breakout
LAYOUT FILES: Simple breakout board for the MBI5168 constant current LED driver. KICAD and Gerber files.
madworm/oshw-logo
The logo for open source hardware
madworm/SOP24_300_1.00_breakout
LAYOUT FILES: Simple breakout board for SOP24-300-1.00 chips (like MBI5030)
madworm/Openbench_logic_sniffer_pull-U_D_wing
LAYOUT FILES: Adds convenient pull-up/down resistor selection (10k) for the Openbench logic sniffer plus selectable pull-up voltage (5.0, 3.3, 2.5, ...) for each bank. KICAD and Gerber files.
madworm/MSOP10_DIP
LAYOUT FILES: MSOP10 / TSSOP8 to DIP adapter. Essential for breadboard prototyping. KICAD and Gerber files.
madworm/avrispmkII_LUFA
CODE: LUFA / avrispmkII modification for easy linux/windows usage.
madworm/IR_remote
CODE: Arduino code for (xx8 chips). Receive raw IR signals with a demodulating IR sensor using a pin-change interrupt.
madworm/V3_x_boards_test
CODE: 8x8 RGB LED Matrix controller board V3: Test code. Arduino code. Designed for 168/328 chips. May need modifications for others.
madworm/DSO_teaser
CODE + a little bit of hardware to test DSOs.
madworm/Arduino---Code--Blocks
CODE: Compling the 'core.a' file for your architecture + compiling 'normal' code. This assumes you have a working avr-gcc, avr-libc and the avr-binutils installed! This is intended to run on linux.
madworm/libmpq
libmpq is a library for manipulating MPQ (MoPaQ) archives, which are used by Blizzard in most of their games (e.g., Diablo, Diablo 2, StarCraft, WarCraft 3, and World of Warcraft).
madworm/mpq-tools
mpq-tools is a set of utilities for manipulating MPQ (MoPaQ) archives, which are used by Blizzard in most of their games (e.g., Diablo, Diablo 2, StarCraft, WarCraft 3, and World of Warcraft).
madworm/show_anim_video
CODE: 8x8 RGB LED Matrix controller board. Show animation(s) stored in FLASH/PROGMEM or sent from a computer. Arduino code. Intended for 168/328 chips. May need modifications for others.