Problem with two cameras (raspberrypi camera and C270 [USB])
Closed this issue · 1 comments
What happened
I set up both cameras yesterday, it was all fine.
Pi Cam as /dev/video0
C270 as /dev/v4l/by-id/usb-046d_0825_B862FCA0-video-index0
Today I started klipper and the Pi again and now some how both cameras where still detected via the logs but got switched internally around.
Log:
Pi Cam -> /dev/video2
C270 -> /dev/video0 but still as /dev/v4l/by-id/usb-046d_0825_B862FCA0-video-index0
And the Pi Camera got no signal.
I used both in ustreamer mode and everything was fine with good fps (around 15).
I changed them around and the C270 was fine again.
But to get the Pi Cam back I have to use camera-streamer, but then both video feeds have low fps at under 5.
What did you expect to happen
I expected both cameras would have the same video{Number} then yesterday because I didn't change anything.
They would be directly callable via /dev/video0 and as /dev/v4l/by-id/usb-046d_0825_B862FCA0-video-index0 for the C270.
I expected the same fps performance then yesterday and the same modes for both of them.
How to reproduce
I'm not sure.
Happened to me every new day when I start my printer.
Additional information
Raspberry Pi 4 B 2Gb
Logitec C270
Raspberry Pi Camera Module 5MP OV5647
crownsnest v4.1.9-gd75a3aeb
klipper v0.12.0-179-g434770ea
mainsail v2.11.2
mainsail-config v1.2.1-0-ge57810d5
moonraker v0.8.0-354-gba942855
sonar v0.1.3-1-geacc498a
System OS-Packages
Ahoi!
It looks like this ticket is a request for help (or similar).
Many helpful people will not see your message here and you are
unlikely to get a useful response.
We use the Github Issue-Tracker only for development related
topics, like feature requests, bug reports etc. To get help,
please join our Discord-Server or ask in Github Discussions:
This ticket will be automatically closed.
Fair wind and a following sea!
~ Your friendly MainsailGithubBot
PS: I'm just an automated script, not a real sailor.