Correct inverter.conf settings & How to send commands?
Opened this issue · 0 comments
Hello,
trying to apply to a MasterPower (also Voltronic) MasterPower PMS 5K-48TOP Off-Grid
HINT: does this also work with USB-to-USB-Cable (Voltronic internal USB to Serial Cypress adapter) or only with COM-RJ45 connection? :D
(currently USB connected tried em all ll /dev/ttyS
ttyS0 ttyS1 ttyS2 ttyS3
)
WatchPower works (using /dev/ttyS0 and /dev/ttyS1?)
have the poller binary compiled :D
dmesg
[ 2.101630] usb 2-1: New USB device found, idVendor=0665, idProduct=5161, bcdDevice= 0.02
[ 2.101699] usb 2-1: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[ 2.111470] hid: raw HID events driver (C) Jiri Kosina
[ 2.120357] usbcore: registered new interface driver usbhid
[ 2.120405] usbhid: USB HID core driver
[ 2.122314] hid-generic 0003:0665:5161.0001: hiddev0,hidraw0: USB HID v1.11 Device [HID 0665:5161] on usb-0000:00:14.0-1/input0
[ 2.136531] PM: Image not found (code -22)
[ 2.230243] usb 2-4: new high-speed USB device number 3 using xhci_hcd
lsusb
Bus 002 Device 002: ID 0665:5161 Cypress Semiconductor USB to Serial <- that's the one
but when running the poller like this:
./inverter_poller -r "QPIGS"
no matter the settings in inverter.conf
device=/dev/hiddev0
device=/dev/hidraw1
device=/dev/ttyS0
device=/dev/ttyUSB0
reply is:
Reply: (empty)
when running WatchPower in DebugMode getting those output
==> /home/user/WatchPower/log/log4j.log <==
==> /home/user/WatchPower/log/debug/2023-06-27 USB-QT.log <==
[2023-06-27 13:40:22](NAK
==> /home/user/WatchPower/log/debug/2023-06-27 USB-QVFW.log <==
[2023-06-27 13:40:23](VERFW:00055.00
==> /home/user/WatchPower/log/debug/2023-06-27 Serial-QPI.log <==
[2023-06-27 13:40:23]
==> /home/user/WatchPower/log/debug/2023-06-27 USB-QVFW2.log <==
[2023-06-27 13:40:23](VERFW2:00098.24
==> /home/user/WatchPower/log/debug/2023-06-27 USB-QVFW3.log <==
[2023-06-27 13:40:25](NAK
==> /home/user/WatchPower/log/debug/2023-06-27 Serial-QPI.log <==
[2023-06-27 13:40:24]
[2023-06-27 13:40:25]
==> /home/user/WatchPower/log/debug/2023-06-27 USB-VERFW:.log <==
[2023-06-27 13:40:26](NAK
==> /home/user/WatchPower/log/debug/2023-06-27 Serial-QPI.log <==
[2023-06-27 13:40:26]
==> /home/user/WatchPower/log/debug/2023-06-27 USB-QPIGS.log <==
[2023-06-27 13:40:27](000.0 00.0 230.1 50.0 0092 0044 001 400 54.00 000 098 0047 0000 167.7 00.00 00000 00010010 00 00 00085 010
==> /home/user/WatchPower/log/debug/2023-06-27 USB-QT.log <==
[2023-06-27 13:40:29](NAK
==> /home/user/WatchPower/log/debug/2023-06-27 USB-QPIRI.log <==
[2023-06-27 13:40:30](230.0 21.7 230.0 50.0 21.7 5000 5000 48.0 46.0 44.0 56.0 54.0 2 030 060 0 1 1 9 01 0 0 54.0 0 0 000
==> /home/user/WatchPower/log/debug/2023-06-27 USB-QPIWS.log <==
[2023-06-27 13:40:30](00000100000000000000000000000000
==> /home/user/WatchPower/log/debug/2023-06-27 USB-QT.log <==
[2023-06-27 13:40:32](NAK
==> /home/user/WatchPower/log/debug/2023-06-27 USB-QBEQI.log <==
[2023-06-27 13:40:32](0 060 030 060 030 58.40 000 120 0 0000
==> /home/user/WatchPower/log/debug/2023-06-27 USB-QPIRI.log <==
[2023-06-27 13:40:33](230.0 21.7 230.0 50.0 21.7 5000 5000 48.0 46.0 44.0 56.0 54.0 2 030 060 0 1 1 9 01 0 0 54.0 0 0 000
==> /home/user/WatchPower/log/debug/2023-06-27 Serial-QPI.log <==
[2023-06-27 13:40:34]
==> /home/user/WatchPower/log/debug/2023-06-27 USB-QSID.log <==
[2023-06-27 13:40:35](1455355535553555355535
==> /home/user/WatchPower/log/debug/2023-06-27 USB-QT.log <==
[2023-06-27 13:40:35](NAK
==> /home/user/WatchPower/log/debug/2023-06-27 Serial-QPI.log <==
[2023-06-27 13:40:35]
[2023-06-27 13:40:37]
==> /home/user/WatchPower/log/debug/2023-06-27 USB-QPIWS.log <==
[2023-06-27 13:40:36](00000100000000000000000000000000
==> /home/user/WatchPower/log/debug/2023-06-27 USB-QT.log <==
[2023-06-27 13:40:38](NAK
==> /home/user/WatchPower/log/debug/2023-06-27 USB-QMOD.log <==
[2023-06-27 13:40:39](B
==> /home/user/WatchPower/log/debug/2023-06-27 USB-QSID.log <==
[2023-06-27 13:40:38](1455355535553555355535
==> /home/user/WatchPower/log/debug/2023-06-27 Serial-QPI.log <==
[2023-06-27 13:40:38]
==> /home/user/WatchPower/log/debug/2023-06-27 USB-QPIGS.log <==
[2023-06-27 13:40:40](000.0 00.0 229.8 50.0 0092 0047 001 409 54.00 000 098 0047 0000 166.4 00.00 00000 00010010 00 00 00001 010
==> /home/user/WatchPower/log/debug/2023-06-27 Serial-QPI.log <==
[2023-06-27 13:40:39]
[2023-06-27 13:40:40]
==> /home/user/WatchPower/log/debug/2023-06-27 USB-QPIGS2.log <==
[2023-06-27 13:40:41](NAK
==> /home/user/WatchPower/log/debug/2023-06-27 Serial-QPI.log <==
[2023-06-27 13:40:42]
==> /home/user/WatchPower/log/debug/2023-06-27 USB-QPIWS.log <==
[2023-06-27 13:40:42](00000100000000000000000000000000
==> /home/user/WatchPower/log/debug/2023-06-27 USB-QT.log <==
[2023-06-27 13:40:43](NAK
tried all sorts of settings X-D
cat inverter.conf
Basic configuration options for the actual inverter polling process...
The device to read from...
Use: /dev/ttyS0 if you have a serial device,
/dev/ttyUSB0 if a USB<>Serial,
/dev/hidraw0 if you're connecting via the USB port on the inverter.
ttyS0 try this
device=/dev/hidraw1
device=/dev/ttyS0
device=/dev/ttyUSB0
HELP! THANKS :D
(really hate this mark down and rather would write
html
why are those letters so big? X-D