mdias/rs_asio

Yamaha Steinberg UR24C USB ASIO

m3talliz3d opened this issue · 3 comments

m3talliz3d commented
  • Input is showing feedback noise.
  • Output is working good
  • When setting input channel to 1 or 2 there is no sound at all.

By feedback noise I mean like screaming sound like when you have two mobiles in the same room and you open speaker on both.

Below is the ASIO-log.txt
0.449 [INFO] AsioHelpers::FindDrivers
0.454 [INFO] ASIO4ALL v2
0.454 [INFO] KATANA
0.454 [INFO] Yamaha Steinberg USB ASIO
0.454 [INFO] RSAsioDeviceEnum::UpdateAvailableDevices - output requesting ASIO driver: Yamaha Steinberg USB ASIO
0.454 [INFO] Creating AsioSharedHost - dll: C:\Program Files (x86)\Yamaha\Yamaha Steinberg USB Driver\ysusb_asio32.dll
0.941 [INFO] ASIO input channels info:
0.941 [INFO] 0 - active: 0, channel: 0, group: 0, isInput: 1, type: ASIOSTInt32LSB, name: UR24C Input 1
0.941 [INFO] 1 - active: 0, channel: 1, group: 0, isInput: 1, type: ASIOSTInt32LSB, name: UR24C Input 2
0.941 [INFO] ASIO output channels info:
0.941 [INFO] 0 - active: 0, channel: 0, group: 0, isInput: 0, type: ASIOSTInt32LSB, name: UR24C Mix L
0.941 [INFO] 1 - active: 0, channel: 1, group: 0, isInput: 0, type: ASIOSTInt32LSB, name: UR24C Mix R
0.941 [INFO] 2 - active: 0, channel: 2, group: 0, isInput: 0, type: ASIOSTInt32LSB, name: UR24C Output 2 L
0.941 [INFO] 3 - active: 0, channel: 3, group: 0, isInput: 0, type: ASIOSTInt32LSB, name: UR24C Output 2 R
0.941 [INFO] RSAsioDeviceEnum::UpdateAvailableDevices - OK

RS_ASIO.ini
[Config]
EnableWasapiOutputs=0
EnableWasapiInputs=0
EnableAsio=1

[Asio.Output]
Driver=Yamaha Steinberg USB ASIO
BaseChannel=0
AltBaseChannel=
EnableSoftwareEndpointVolumeControl=1
EnableSoftwareMasterVolumeControl=1
SoftwareMasterVolumePercent=100
EnableRefCountHack=

[Asio.Input.0]
Driver=Yamaha Steinberg USB ASIO
Channel=0
EnableSoftwareEndpointVolumeControl=1
EnableSoftwareMasterVolumeControl=1
SoftwareMasterVolumePercent=100
EnableRefCountHack=

mdias commented

Please check your interface's DSP Mix software to ensure you don't have any special loopback mode or send going into your input channels.

  • 👍1
m3talliz3d commented

Thanks Micael, I would like to thank you for the effort you have done on this project, I was that close to delete this game for the latency Tone Cable provided.

I forgot my Loopback on "Live cast" and once I turned it off, everything worked great and latency and sound are perfect.

mdias commented

Thank you for reporting back. I've added this interface to the list too.
Enjoy 👍