mholgatem/GPIOnext

Conflict with touch screens

Oneil974 opened this issue · 1 comments

Oneil974 commented

Hi,

GPIONEXT seem to be in conflict with touch screens that are using some GPIO pins to work. Is there any way to avoid some pins from GPIONEXT config to remove conflict ?

I use touch screen with DSI and 4 pins to GPIO

Thanks

Oneil974 commented

If somebody get the same problem juste force gpionext to watch for specific GPIOs and don’t add screen GPIOs numbers it will work well.
Just use predefined command gpionext set pins [#,#,#|default]