Issues
- 0
On / off switch
#7 opened by mibe - 0
Use an USB-C connector
#6 opened by mibe - 0
Reset signal oscillates
#8 opened by mibe - 2
High quiescent current
#5 opened by mibe - 0
The up / down buttons do not add / subtract one
#9 opened by mibe - 0
Brightness control does not control the brightness
#10 opened by mibe - 0
Decimal point is not dimmed
#11 opened by mibe - 0
Indication when counting
#3 opened by mibe - 0
High quiescent current in battery mode
#4 opened by mibe - 0
On / off switch
#2 opened by mibe - 0
Voltage for K1 too low because of voltage drop
#1 opened by mibe