read SMS
GoogleCodeExporter opened this issue · 6 comments
GoogleCodeExporter commented
Hello, thanks for this library. show
Please, I'm using the example GSM_GPRSLibrary_SMS.ino and a GPRS card
(http://www.elecfreaks.com/wiki/index.php?title=EFCom_GPRS/GSM_Shield).
- Arduino Uno and duamilanove.
- IDE 1.0.3
- Linux
The problem is that I could read the SMS only 2 times I sent several messages.
Can you tell me what to do?
thank you very much
Sérgio
Original issue reported on code.google.com by sergioli...@gmail.com on 13 Mar 2013 at 3:45
GoogleCodeExporter commented
Hi Sergio,
Can you describe better your experience?
If you send only one SMS, can you read it?
If you send two SMS, can you read theme?
If you send several SMS, you can read only two. Isn't it?
Thanks,
Marco
Original comment by martines...@gmail.com on 13 Mar 2013 at 12:13
GoogleCodeExporter commented
hello, I used this example and learned to use the function .. thanks
http://www.open-electronics.org/ikea-sms-lamp-with-gsm-shield/
Original comment by sergioli...@gmail.com on 16 Apr 2013 at 8:24
GoogleCodeExporter commented
Hi Marco,
I sent one and waited a few minutes, nothing.
I sent two and then in sequence and nothing more.
at some point so I called the arduino and sent a message he read and shown on
the monitor sent messages and nothing new.
I turned off the machine and called again and repeated the process and nothing.
thank you very much
Sérgio
Original comment by sergioli...@gmail.com on 13 Mar 2013 at 1:41
GoogleCodeExporter commented
hello,
Today I found this post
(https://code.google.com/p/gsm-shield-arduino/issues/detail?id=64) saying how
to enable debugging:
GSM.h
# define DEBUG_ON
So I have the following outputs
AFTER TURN-ON THE ARDUINO
GSM Shield testing.
ATT:
OKRIC:
OK
DB:ELSE
ATT:
OKRIC:
OK
DB:ELSE
ATT:
OKRIC:
OK
DB:ELSE
ATT:
OKRIC:
OK
DB:CORRECT BR
ATT:
OKRIC:
OK
ATT:
OKRIC:
OK
ATT:
OKRIC: ATE0
OK
ATT:
OKRIC:
OK
ATT:
OKRIC:
OK
ATT:
OKRIC:
OK
ATT:
OKRIC:
OK
ATT:
+CPMS:RIC:
+CPMS: 0,50,0,50,0,50
OK
ATT:
OKRIC:
OK
ATT:
SHUT OKRIC:
SHUT OK
status=READY
ATT:
+CMGLRIC:
OK
ATT:
OKRIC:
ERROR
ATT:
+CMGLRIC:
OK
...
---------------------------------
AFTER SENDING A MESSAGE WITH TEXT TEST
ATT:
+CMGLRIC:
OK
ATT:
OKRIC:
ERROR
ATT:
+CMGLRIC:
+CMGL: 1,"REC UNREAD","011983002197","","13/03/13,13:28:36-12"
Test
OK
ATT:
+CMGLRIC:
+CMGL: 1,"REC UNREAD","011983002197","","13/03/13,13:28:36-12"
Test
OK
ATT:
+CMGLRIC:
+CMGL: 1,"REC UNREAD","011983002197","","13/03/13,13:28:36-12"
Test
OK
it loops and keeps repeating the message.
But if I disable debug shows nothing on the screen.
Thanks
Sérgio
Original comment by sergioli...@gmail.com on 13 Mar 2013 at 4:30
GoogleCodeExporter commented
This issue section is not longer supported.
Please check the support page www.gsmlib.org
Original comment by martines...@gmail.com on 6 Jul 2013 at 11:26
GoogleCodeExporter commented
This issue section is not longer supported.
Please check the support page www.gsmlib.org
Original comment by martines...@gmail.com on 6 Jul 2013 at 11:27
- Changed state: Fixed