TKB Home

This app adds support for TKB Home devices in Homey.

Supported devices:

TZ65 - Single & Dual Wall Dimmer
TZ66 - Single & Dual Wall Switch
TZ67 - Wallplug Dimmer (all types)
TZ68 - Wallplug Switch (all types)
TZBET68 - Wallplug Switch (Z-Wave Plus) (all types)

Supported Languages:

English
Dutch (Nederlands)

Notes:

TZ65 The TZ65 needs to use polling to get the correct dim state of the output in certain situations.
The is by default on 300 seconds (5 minutes).
It is not recommended to put this below 60 seconds (1 minute),
it might cause too much traffic.
you can also manually update the state by just pressing the left switch
You can turn it off (value: 0), if you only want/need to update the state manually

Change Log:

1.0.1: Added support for TSP01 3-in-1 Motion Sensor

1.0.0: Update Z-Wave driver (1.1.0)
Fixed TZ65D right button flow triggers
Add support TZ66 (Single & Dual)
Add support TZBET68 (all types) Add Polling for TZ67 and TZ68 (needed if people use the hardware button.)

0.9.4: Fixed TZ67 & TZ68 their HardWare state change report

0.9.3: Fixed TZ68 not using the right Command Class
Fixed flow cards TZ65

0.9.2: Fixed a bug in flow triggers TZ65(D)
Fixed a bug that TZ67 & TZ68 state in homey did not change on physical changes

0.9.1: Changed TZ65D to TZ65 (TZ65S & TZ65D are both same driver)

0.9.0: First Addition to app-store.

Donate:

If you like the work that I have done, and loved the magic.
Maybe you can think about filling my magic meter again: