uninstall crash fstab external HDD
Closed this issue · 6 comments
Hello,
i installed this on my Raspberry Pi 2 raspbian Jessie. And now my external Harddrive cant be mounted via fstab. Do you have any idea how i can solve this?
I already deleted the backup udev files.
thank you very much.
uname -a
Linux raspberrypi 4.9.78-v7+ #1084 SMP Thu Jan 25 18:05:49 GMT 2018 armv7l GNU/Linux
Thank you for your fast reply. And no i mentioned i forgot some details:
fstab is not mount this USB Drive, but wenn i do sudo mount -a it is mounted.
/etc/fstab:
proc /proc proc defaults 0 0
/dev/mmcblk0p1 /boot vfat defaults 0 2
/dev/mmcblk0p2 / ext4 defaults,noatime 0 1
UUID=d2027501-c0b2-4391-9c97-39b9bee0f941 /media/USB-HDD ext4 defaults,nofail 0 0
# a swapfile is not a swap partition, so no using swapon|off from here on, use dphys-swapfile swap[on|off] for that``
fstab should mount your drive automatically if it is connected at boot-time.
Make sure you are not attaching the drive AFTER the boot, or it will be perfectly normal that you have to mount -a to mount it.
yeah that´s what it should do :) but since the installation it doesnt work anymore.
dmesg with mount -a in cron works, and disk is found very early (sda):
[ 0.000000] Booting Linux on physical CPU 0xf00
[ 0.000000] Linux version 4.9.78-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611) ) #1084 SMP Thu Jan 25 18:05:49 GMT 2018
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt:Machine model: Raspberry Pi 2 Model B Rev 1.1
[ 0.000000] cma: Reserved 8 MiB at 0x3ac00000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 242688
[ 0.000000] free_area_init_node: node 0, pgdat 80c6f440, node_mem_map ba3a1000
[ 0.000000] Normal zone: 2133 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 242688 pages, LIFO batch:31
[ 0.000000] percpu: Embedded 14 pages/cpu @ba35c000 s25600 r8192 d23552 u57344
[ 0.000000] pcpu-alloc: s25600 r8192 d23552 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 240555
[ 0.000000] Kernel command line: bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=dea
dline rootwait quiet splash plymouth.ignore-serial-consoles
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 940368K/970752K available (7168K kernel code, 486K rwdata, 2012K rodata, 1024K init, 770K bss, 22192K reserved, 8192K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xbb800000 - 0xff800000 (1088 MB)
lowmem : 0x80000000 - 0xbb400000 ( 948 MB)
modules : 0x7f000000 - 0x80000000 ( 16 MB)
.text : 0x80008000 - 0x80800000 (8160 kB)
.init : 0x80b00000 - 0x80c00000 (1024 kB)
.data : 0x80c00000 - 0x80c798fc ( 487 kB)
.bss : 0x80c7b000 - 0x80d3b9a4 ( 771 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000009] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000024] Switching to timer-based delay loop, resolution 52ns
[ 0.000339] Console: colour dummy device 80x30
[ 0.000361] console [tty1] enabled
[ 0.000386] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000408] pid_max: default: 32768 minimum: 301
[ 0.000780] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000795] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002084] Disabling memory control group subsystem
[ 0.002194] CPU: Testing write buffer coherency: ok
[ 0.002246] ftrace: allocating 22402 entries in 66 pages
[ 0.053821] CPU0: update cpu_capacity 1024
[ 0.053843] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
[ 0.053889] Setting up static identity map for 0x100000 - 0x100034
[ 0.056697] CPU1: update cpu_capacity 1024
[ 0.056709] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
[ 0.057735] CPU2: update cpu_capacity 1024
[ 0.057744] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
[ 0.058739] CPU3: update cpu_capacity 1024
[ 0.058749] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
[ 0.058879] Brought up 4 CPUs
[ 0.058894] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.058899] CPU: All CPU(s) started in HYP mode.
[ 0.058904] CPU: Virtualization extensions available.
[ 0.060011] devtmpfs: initialized
[ 0.073647] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.074046] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.074070] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.074849] pinctrl core: initialized pinctrl subsystem
[ 0.076128] NET: Registered protocol family 16
[ 0.078756] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.089280] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.089291] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.089491] Serial: AMBA PL011 UART driver
[ 0.091891] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 0.175285] bcm2835-dma 3f007000.dma: DMA legacy API manager at bb80d000, dmachans=0x1
[ 0.177717] SCSI subsystem initialized
[ 0.177925] usbcore: registered new interface driver usbfs
[ 0.178026] usbcore: registered new interface driver hub
[ 0.178178] usbcore: registered new device driver usb
[ 0.183694] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-01-25 18:09
[ 0.185464] clocksource: Switched to clocksource arch_sys_counter
[ 0.240442] VFS: Disk quotas dquot_6.6.0
[ 0.240553] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.240845] FS-Cache: Loaded
[ 0.241207] CacheFiles: Loaded
[ 0.257722] NET: Registered protocol family 2
[ 0.258970] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.259099] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.259287] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.259403] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.259460] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.259779] NET: Registered protocol family 1
[ 0.260428] RPC: Registered named UNIX socket transport module.
[ 0.260438] RPC: Registered udp transport module.
[ 0.260444] RPC: Registered tcp transport module.
[ 0.260450] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.261579] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[ 0.264617] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 0.283552] FS-Cache: Netfs 'nfs' registered for caching
[ 0.284834] NFS: Registering the id_resolver key type
[ 0.284875] Key type id_resolver registered
[ 0.284882] Key type id_legacy registered
[ 0.288245] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.288420] io scheduler noop registered
[ 0.288428] io scheduler deadline registered (default)
[ 0.288796] io scheduler cfq registered
[ 0.294485] BCM2708FB: allocated DMA memory fad00000
[ 0.294523] BCM2708FB: allocated DMA channel 0 @ bb80d000
[ 0.304115] Console: switching to colour frame buffer device 82x26
[ 0.311593] bcm2835-rng 3f104000.rng: hwrng registered
[ 0.311717] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 0.312398] vc-sm: Videocore shared memory driver
[ 0.332827] brd: module loaded
[ 0.344190] loop: module loaded
[ 0.344206] Loading iSCSI transport class v2.0-870.
[ 0.344961] usbcore: registered new interface driver smsc95xx
[ 0.344984] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.573194] Core Release: 2.80a
[ 0.573208] Setting default values for core params
[ 0.573249] Finished setting default values for core params
[ 0.773710] Using Buffer DMA mode
[ 0.773718] Periodic Transfer Interrupt Enhancement - disabled
[ 0.773724] Multiprocessor Interrupt Enhancement - disabled
[ 0.773732] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.773745] Dedicated Tx FIFOs mode
[ 0.774235] WARN::dwc_otg_hcd_init:1032: FIQ DMA bounce buffers: virt = 0xbad14000 dma = 0xfad14000 len=9024
[ 0.774265] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
[ 0.774275] dwc_otg: Microframe scheduler enabled
[ 0.774334] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x80590b3c
[ 0.774346] WARN::hcd_init_fiq:460: FIQ ASM at 0x80590eac length 36
[ 0.774360] WARN::hcd_init_fiq:486: MPHI regs_base at 0xbb878000
[ 0.774423] dwc_otg 3f980000.usb: DWC OTG Controller
[ 0.774471] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 0.774516] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[ 0.774567] Init: Port Power? op_state=1
[ 0.774572] Init: Power Port (0)
[ 0.774878] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.774891] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.774901] usb usb1: Product: DWC OTG Controller
[ 0.774911] usb usb1: Manufacturer: Linux 4.9.78-v7+ dwc_otg_hcd
[ 0.774921] usb usb1: SerialNumber: 3f980000.usb
[ 0.776014] hub 1-0:1.0: USB hub found
[ 0.776084] hub 1-0:1.0: 1 port detected
[ 0.777030] dwc_otg: FIQ enabled
[ 0.777037] dwc_otg: NAK holdoff enabled
[ 0.777043] dwc_otg: FIQ split-transaction FSM enabled
[ 0.777060] Module dwc_common_port init
[ 0.777383] usbcore: registered new interface driver usb-storage
[ 0.777725] mousedev: PS/2 mouse device common for all mice
[ 0.779009] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[ 0.779384] bcm2835-cpufreq: min=600000 max=1000000
[ 0.779899] sdhci: Secure Digital Host Controller Interface driver
[ 0.779906] sdhci: Copyright(c) Pierre Ossman
[ 0.780265] sdhost-bcm2835 3f202000.sdhost: could not get clk, deferring probe
[ 0.780509] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.781286] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.781473] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.781727] usbcore: registered new interface driver usbhid
[ 0.781733] usbhid: USB HID core driver
[ 0.782725] vchiq: vchiq_init_state: slot_zero = 0xbad80000, is_master = 0
[ 0.784339] [vc_sm_connected_init]: start
[ 0.793094] [vc_sm_connected_init]: end - returning 0
[ 0.793556] Initializing XFRM netlink socket
[ 0.793588] NET: Registered protocol family 17
[ 0.793743] Key type dns_resolver registered
[ 0.794201] Registering SWP/SWPB emulation handler
[ 0.795138] registered taskstats version 1
[ 0.801938] uart-pl011 3f201000.serial: cts_event_workaround enabled
[ 0.802036] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[ 0.802101] console [ttyAMA0] enabled
[ 0.804131] sdhost: log_buf @ bad13000 (fad13000)
[ 0.875512] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 0.875689] of_cfs_init
[ 0.876100] of_cfs_init: OK
[ 0.876866] Waiting for root device /dev/mmcblk0p2...
[ 0.942524] mmc0: host does not support reading read-only switch, assuming write-enable
[ 0.944422] mmc0: new high speed SDHC card at address 0001
[ 0.945383] mmcblk0: mmc0:0001 00000 29.8 GiB
[ 0.947352] mmcblk0: p1 p2
[ 0.998597] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[ 0.998610] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[ 1.005633] Indeed it is in host mode hprt0 = 00021501
[ 1.088562] random: fast init done
[ 1.205535] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.205733] Indeed it is in host mode hprt0 = 00001101
[ 1.420963] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[ 1.435950] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ 1.435966] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.437036] hub 1-1:1.0: USB hub found
[ 1.437188] hub 1-1:1.0: 5 ports detected
[ 1.444678] EXT4-fs (mmcblk0p2): 17 orphan inodes deleted
[ 1.444689] EXT4-fs (mmcblk0p2): recovery complete
[ 1.492935] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.493013] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 1.494047] devtmpfs: mounted
[ 1.495983] Freeing unused kernel memory: 1024K
[ 1.755538] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 1.827430] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[ 1.827927] systemd[1]: Detected architecture 'arm'.
[ 1.885932] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 1.885950] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.889061] smsc95xx v1.0.5
[ 1.947062] NET: Registered protocol family 10
[ 1.949021] systemd[1]: Inserted module 'ipv6'
[ 1.951336] systemd[1]: Set hostname to .
[ 1.980989] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:a1:c7:40
[ 2.049046] uart-pl011 3f201000.serial: no DMA platform data
[ 2.439119] systemd-sysv-generator[95]: Overwriting existing symlink /run/systemd/generator.late/twonkyserver.service with real service
[ 2.465553] usb 1-1.5: new high-speed USB device number 4 using dwc_otg
[ 2.601262] usb 1-1.5: New USB device found, idVendor=2109, idProduct=0701
[ 2.601281] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.601292] usb 1-1.5: Product: External USB 3.0
[ 2.601302] usb 1-1.5: Manufacturer: Intenso
[ 2.601312] usb 1-1.5: SerialNumber: 20130302005313
[ 2.603433] usb-storage 1-1.5:1.0: USB Mass Storage device detected
[ 2.604455] scsi host0: usb-storage 1-1.5:1.0
[ 2.636821] systemd[1]: [/lib/systemd/system/mpd.service:17] Unknown lvalue 'ControlGroup' in section 'Service'
[ 2.636913] systemd[1]: [/lib/systemd/system/mpd.service:20] Unknown lvalue 'ControlGroupAttribute' in section 'Service'
[ 2.781939] systemd[1]: Expecting device dev-ttyAMA0.device...
[ 2.782456] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 2.782784] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.782890] systemd[1]: Starting Remote File Systems (Pre).
[ 2.979163] fuse init (API version 7.26)
[ 3.361132] systemd-udevd[147]: starting version 215
[ 3.683428] scsi 0:0:0:0: Direct-Access Intenso External USB 3.0 0006 PQ: 0 ANSI: 6
[ 3.688752] sd 0:0:0:0: [sda] 732566646 4096-byte logical blocks: (3.00 TB/2.73 TiB)
[ 3.689369] sd 0:0:0:0: [sda] Write Protect is off
[ 3.689394] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 3.689989] sd 0:0:0:0: [sda] No Caching mode page found
[ 3.690005] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 3.929203] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[ 4.086283] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 4.401294] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.492803] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 4.591505] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 4.591764] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4.664787] systemd-journald[141]: Received request to flush runtime journal from PID 1
[ 6.107859] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6.109389] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
[ 6.584737] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 7.420778] Process accounting resumed
[ 9.743557] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 9.764959] NFSD: starting 90-second grace period (net 80c65380)
[ 13.060877] sda: sda1
[ 13.166043] random: crng init done
[ 13.168004] sd 0:0:0:0: [sda] Attached SCSI disk
[ 15.764655] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 16.341666] EXT4-fs (sda1): recovery complete
[ 16.342219] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 22.530944] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 22.648270] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 23.023597] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 23.828799] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 23.829064] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 25.358806] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 25.360482] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
Well that's weird: with both mpradio installed or removed, there's really nothing that should interfere with a simple fstab rule/entry. Nothing in the code / nor in the install/removal procedure and so on.. I have to say to me, il really looks like a generic Linux issue, take a look at some guy having the very same issue in similar (random) circumstances : https://superuser.com/questions/439966/why-is-my-usb-drive-not-mounted-during-startup
maybe try adding "auto" to the mount options?
Seems like there's nothing left to say. Please reopen if needed