Nuclear Radiation
Vitaliy86 opened this issue · 1 comments
Vitaliy86 commented
Nuclear Radiation levels if available. The X is the type indicator. We chose "X" for radiation.
nakhonthai commented
Thank for infomation.
Re design protocol for weather.
// c...s...g...t...r...p...P...h..b.....L...S..m...M...w...W....v...o...O...x....F....T....
#define WX_NONE 0
#define WX_WIND_DIR (1 << 0) // c Wind Direction (in degrees)
#define WX_WIND_SPD (1 << 1) // s Wind Speed (mhp)
#define WX_WIND_GUST (1 << 2) // g Wind Gust (peak wind speed in mph in the last 5 minutes)
#define WX_TEMP (1 << 3) // t Temperature (Fahenheit)
#define WX_RAIN (1 << 4) // r Rain collector (in hundredths of an inch) last hour
#define WX_RAIN24HR (1 << 5) // p Rain collector (in hundredths of an inch) Last 24 Hr
#define WX_RAIN_GMT (1 << 6) // P Rain collector (in hundredths of an inch) Sine Midnight (GMT+0)
#define WX_HUMIDITY (1 << 7) // h Humidity
#define WX_BARO (1 << 8) // b Barometric Pressure (in thenths of millibars/tenths of hPascal)
#define WX_LUMINOSITY (1 << 9) // L,l Luminosity (in watts per square meter) L=0-999,l=1000-9999
#define WX_SNOW (1 << 10) // S Snowfall (in inches) in the last 24 hours
#define WX_SOIL_TEMP (1 << 11) // m Soil temperature (Fahenheit)
#define WX_SOIL_MOISTURE (1 << 12) // M Soil Moisture (0-40%VWC)
#define WX_WATER_TEMP (1 << 13) // w Water (Fahenheit)
#define WX_WATER_TDS (1 << 14) // W Water TDS(Total Dissolved Solids) 0-1000ppm
#define WX_WATER_LEVEL (1 << 15) // v Water Level (in hundredths of an inch)
#define WX_PM25 (1 << 16) // o Ordure PM 2.5 0~1000μg/m³
#define WX_PM100 (1 << 17) // O Ordure PM 10 ,0~1000μg/m³
#define WX_CO2 (1 << 18) // X,x Co2 (PPM) x=0-9999,X=010000-999999
#define WX_CH2O (1<<19) //F,f Formaldehyde(CH2O) F=0-9999,f,1000-2000 μg/m³
#define WX_TVOC (1<<20) // T