nebkat/esp32-xbee

Issues

• no rtk corrections with swipos (swiss rtk corrections)

  #63 opened 2 months ago by namork
  2

• Need help with understanding why my ESP32 is disconnecting from caster

  #62 opened 4 months ago by mbackonja
  7

• Panic reset triggered by switch to UDP as Socket protocol

  #61 opened 6 months ago by gadgetmad
  0

• transferring data between 2 esp32 using XBEE S2c

  #60 opened 7 months ago by haikalmicha
  0

• Loss of RTK Base Access after client disconnection

  #59 opened 7 months ago by Bacamezeu
  0

• WiFi Hotspot lists incorrect Min/Max IP address

  #58 opened 7 months ago by chriskinal
  0

• Comparability with browsers.

  #57 opened 7 months ago by incarvr6
  0

• Firmware installation on classic esp32

  #56 opened 7 months ago by marcuzz0
  0

• Add bluetooth support for obtaining NMEA

  #48 opened 3 years ago by gdt
  12

• Cannot see ESP32 Xbee on Wifi

  #55 opened a year ago by greenex94
  1

• ArduSimple WiFi NTRIP Master - cannot set password to hotspot

  #54 opened 2 years ago by djdan7
  0

• ESP-IDF Version to Build 0.5.4?

  #47 opened 3 years ago by niabassey
  1

• Add VSCode / PlatformIO project & build instructions as alternative to uploading pre-built binaries

  #51 opened 2 years ago by semuadmin
  1

• RTK2go.com now requires a user email to connect

  #53 opened 2 years ago by DavidKelleySCSC
  0

• Question: Can you explain IP forwarding/NATP ?

  #52 opened 2 years ago by jschwalbe
  1

• Packets needed for Caster

  #26 opened 4 years ago by openedhardware
  4

• Hotspot not working on v0.5.3 and v0.5.4

  #50 opened 3 years ago by mbackonja
  0

• DJI Controller unable to connect

  #49 opened 3 years ago by tvanderweide
  0

• Issues with Android 11

  #46 opened 3 years ago by thomasjetzinger
  1

• Configuration Issue.

  #45 opened 3 years ago by roontoon
  0

• NTRIP Caster not working

  #44 opened 3 years ago by ralphkink
  1

• send nmea data from socket server over http

  #43 opened 3 years ago by Fehler40
  0

• Sending position to base station

  #33 opened 3 years ago by CuNoah
  1

• NTRIP compliant messages (GGA only)

  #28 opened 4 years ago by fisart
  7

• WiFi WPA2 Enterprise

  #15 opened 5 years ago by steffnat
  4

• esp32 WIFI not connecting

  #42 opened 3 years ago by Jbt82
  4

• /23 Subnet displayed as /16

  #41 opened 3 years ago by niabassey
  0

• Board Design Files

  #40 opened 3 years ago by niabassey
  0

• Odd Caster connection attempts seen

  #32 opened 4 years ago by DavidKelleySCSC
  1

• Is UART1, UART2 or pin TX RX choosing working?

  #30 opened 4 years ago by lukaszSZ999
  3

• XBee Mechanical drawings

  #37 opened 3 years ago by flywire
  0

• Socket client restart loop

  #35 opened 4 years ago by haipas
  0

• Request Software Upgrade Profile/NMEA to Caster

  #34 opened 4 years ago by chreiter
  0

• Compiling esp32-xbee - button.h missing

  #31 opened 4 years ago by MichaelEFlip
  2

• Hardware setup with esp32 dev kit

  #29 opened 4 years ago by haipas
  2

• Inject 1008 message

  #13 opened 5 years ago by d1ken
  33

• Autoconnect to multiple hotspots option?

  #23 opened 4 years ago by arwooldridge
  2

• About the esp-idf version required for compilation.

  #27 opened 4 years ago by lisn3188
  1

• 431 Request Header Fields Too Large

  #24 opened 4 years ago by jrvoice
  4

• WiFi Ntrip master is restarting every 3 second

  #21 opened 4 years ago
  2

• ubx messages to NTRIP or socket

  #25 opened 4 years ago by jubru
  2

• Suggestion: Some sort of extra wifi watchdog

  #10 opened 5 years ago by AndrewR-L
  1

• Custom NTRIP client for simpleRTK2B board

  #22 opened 4 years ago by openedhardware
  2

• esp32 ntrip master no connection to the Configuration page

  #19 opened 4 years ago by GeorgLinsberger
  3

• WiFi Not Active?

  #20 opened 4 years ago by JD4650
  1

• Add support SIM800L for NTRIP server

  #18 opened 4 years ago by d1ken
  2

• How to verify NTRIP client is working

  #17 opened 5 years ago by greymfm
  1

• ntripserver adds text

  #11 opened 5 years ago by aortner
  7

• V0.50 will not load, V0.44 and earlier load fine

  #9 opened 5 years ago by n8it
  8

• Suggest change Wifi hotspot bandwith to 20Mhz and allow Wifi station to connect to strongest signal

  #8 opened 5 years ago by AndrewR-L
  2