Remote AI Module (REM-11100) does not get any value with the Scan Engine and EtherCAT CD in VeriStand
Karl-G1 opened this issue · 1 comments
Karl-G1 commented
Copied from an internal bug:
When trying to read Remote I/O AI Module (REM 11100) over the SEEC CD, I do not get any value.
When trying the Remote I/O example within LabVIEW it works.
Following system Setup:
PXI-8800 + REM 11180 Bus Coupler + NI 9144
REM 11180 + REM 11100 AI module
NI 9144 with NI 9201 AI and NI 9263 AO module
NI 9263 AO 0 -> REM 11100 AI 0
NI 9263 AO 3 -> NI 9201 AI 0
Image
Software wise I tested it with VS 2019 R3 and LabVIEW 2019 SP1
I'll attach a MAX report of my system.
This is how it looks like in the VS project.
The upper AI 0 is from the C-Series module, while the lower one is the one of the Remote I/O.
I already deactivated the mean value in the configuration