nicsure/QuanshengDock

[Feature] XVFO: ideas for Keyboard key-assignment

ErikS-web opened this issue · 16 comments

Suggest

F set Mode FM. f for FM- narrow and F for FM-wide
M of m for max Mic Gain (100%)
P or p for vary Power
Q of q for toggle sQuelch open
Tor t for transmit 1750 Khz

I can set F to toggle between FM Wide and FM Narrow, but F is just F there's no distinction between upper and lower case.
M is already used to toggle through modes, suggest another key for that.
Power on P will be in next release.
Squelch on Q will be in next release.
T I'm not sure about, do you mean transmit a 1750Hz tone?

F as a quick key to go2 FM-wide and than toggle Wide/Narrow

M is indeed already in use and I mentioned it on the key-assignment on the Wiki
Perhabs use Gain or Voice

P and Q nice

T indeed to perform the 1750 Hz tone

In next release :
F = FM Wide/Narrow toggle.
G = Mic gain
S = Toggle squelch mode, (same function as clicking the button)

Need to work on T bear with me.

Suggest ... just like DTMF active and pressing (numeric) keys..

Next release will have extra keys ... already mentioned in the Online manual

Q or S for sQuelch ?

Q is the same as clicking Open to open the squelch.
S is the same as clicking Squelch to change the squelch setting.

All done, managed to get T to send a 1 second 1750Hz tone when pressed during transmit.

Nice, but why can GAIN not set to 100% (Is now from 0 .. 96%)

Suggest to toggle to MAX (100%) and NOT rotate back from 0

Well I'm sorry I can't do everything exactly as you suggest, the difference between 100% and 96% is not even humanly noticeable.

Well, I think to hear it is somewhat stronger audio signal at 100%.
And do not have any reason to start from 0.

At all my radio's I have to set Menu.31 Mic to MAX value +15.1dB to be able to have good volume with external microphone.

Editing the Wike now with latest release.

How2 explain SQ-1... -4 ?
So I user SQ-R in combination with "Bar". Or how do you call that ?

Selecting these item don't show anything changing on my screen

Above mentioned Temporary label removed.

All keys now here keyboard-key-assignment

Could you verify ?

Keys look good.

Thanks to user GikaH for additional feedback