RA01-SH network join

[barbiani]

Hi,

Thank you for sharing this library.

I am trying to join a node to a local network with a ra-01sh,

This is the log level 2 output. Can you point me to a successful join log?

7365 Radio Init
7391 NSS:27, RST:23, DIO0:25, DIO1:26
7794 Reg< 740
7816 Config synch word 14==14
7824 Config synch word 24==24
7833 Status 22 mode : 2, status 1
7841 Set Radio to sleep
7848 Cmd> 84
8498 Set Radio to sleep
8504 Cmd> 84
55409 Packet queued
56163 EV_JOINING
showState(): rssi -139
showState(): state: Joining
56203 Uplink join pending
56851 Airtime available at 486091 (previously determined)
56860 Uplink delayed until 486091
485973 Uplink join pending
485987 Airtime available at 486091 (previously determined)
485996 Ready for uplink
486032 Time on air : 61 ms
486046 Updating global duty avail to 979613
486709 Cmd> 80
486729 Cmd> 96
486738 Cmd> 98
486748 Cmd> 97
486758 Cmd> 89
486766 Cmd> 80
487412 Cmd> 8a
487420 Reg> 740
487429 Init Configure done
487438 Cmd> 86
487447 Cmd> 8b
487456 Cmd> 8c
487465 Cmd> 95
487473 Cmd> 8e
488123 Cmd> 8f
488137 Cmd> 2
488145 Cmd> 8
488155 Cmd> 83
488165 Status b2 mode : 3, status 1
488173 TXMODE, freq=902300000, len=23, SF=7, BW=125, CR=4/5
492060 Not using interupt trigger 0
492076 Cmd> 8
492091 Cmd> 2
492099 Set Radio to sleep
492105 Cmd> 84
492113 End TX 492059
492124 SchedRx RX1/2
492773 Rx delay : 4968 ms
492790 Cmd> 80
492801 Cmd> 96
492810 Cmd> 98
492819 Cmd> 97
492828 Cmd> 89
492836 Cmd> 80
493481 Cmd> 8a
493489 Reg> 740
493498 Init Configure done
493505 Cmd> 86
493514 Cmd> 8b
493522 Cmd> 8c
493531 Cmd> 8
493540 Cmd> 2
494187 Cmd> ffffffc1
494196 Cmd> 82
800100 Cmd> 80
800114 Cmd> 96
800123 Cmd> 98
800131 Cmd> 97
800140 Cmd> 89
800148 Cmd> 80
800156 Cmd> 8a
800164 Reg> 740
800173 Init Configure done
800818 Cmd> 86
800828 Cmd> 8b
800836 Cmd> 8c
800845 Cmd> a0
800854 Cmd> 8
800863 Cmd> 2
800871 Cmd> ffffffc1
802572 Cmd> 82

No more output...