Always mopping on S-pattern. Even when Y-pattern mode is set.
Opened this issue · 7 comments
Thank you for integrating. It works very well with my Viomi2Pro. However, I noticed one thing when controlling from the HA level. It's about the Y-pattern mopping mode. When I start mopping from mi-home it mops correctly to Y. If moping is started with HA (although Y is set in the program) it mops to "S-pattern".
The attribute responsible for the mopping mode in HA is:
mop_oute: 0 (S-pattern)
mop_route: 1 (Y-pattern)
Did you finally manage to set the mopping mode?
no :(
no :(
Next week will try rooting and installing valetudo, I think it has more options available for the styj02ym
@forast3r can you please report back once you install Valetudo? I'm thinking about doing it too
@forast3r can you please report back once you install Valetudo? I'm thinking about doing it too
I am using miiocli for the settings like mopping in Y pattern.
Valetudo for viomi is still very recent, must use development version to have a working vacuum.
Using valetudo there is no need for an additional integration, because the basic commands are working with MQTT. Also the cleaning map can be integrated into home-assistant.
@forast3r can you please report back once you install Valetudo? I'm thinking about doing it too
I am using miiocli for the settings like mopping in Y pattern.
Valetudo for viomi is still very recent, must use development version to have a working vacuum.
Using valetudo there is no need for an additional integration, because the basic commands are working with MQTT. Also the cleaning map can be integrated into home-assistant.
Thanks for the report! Honestly, I'm using now the custom integration and apart from the start/stop and the vacuum power, I'm not using much... but I don't know why, my vacuum FW version is quite old and has not been upgraded since I got it, so multy-floor map is not working, and it has some errors from time to time (running out of battery while cleaning, for example) so I was thinking on giving valetudo a test... Anyway, sorry for hijacking the post!
"Viomi Models: Add support to Y-Pattern (send 1 instead of 0 when calling "set_mode_withroom" commands) · Issue #231 · homebridge-xiaomi-roborock-vacuum/homebridge-xiaomi-roborock-vacuum · GitHub" homebridge-xiaomi-roborock-vacuum/homebridge-xiaomi-roborock-vacuum#231