Not connected to the phone !

[offici5l]

If you're using Windows, Linux, Mac, ... make sure to delete any previous version of Adb&Fastboot

1. Reboot the device into bootloader mode.
2. Connect the device via cable (if it doesn't work, try using a different cable; it's preferable to use the original cable for your device).

If you're using Termux: Make sure to install Termux-API app.

1. Reboot the device into bootloader mode.
2. Connect the devices via cable(with otg)
   (Make sure that the device supports OTG, and sometimes in some devices you must activate OTG manually)
   
   (if it doesn't work, try using a different cable; it's preferable to use the original cable for your device).

(termux users only)

issue "Not connected to the phone !"

Sometimes just try reboot device to bootloader mode again solves the problem

Some devices take a long time to recognize the device The default time set is 6 seconds, so this can be changed by increasing the time with the command :

miunlock time12

(Instead of 12, you can use the time you see fit, "in seconds")

therefore, if you encounter problems, you can change the device in which you use the termux because the problem is only in some devices

If you do not have another device, you can use manual mode with command :

miunlock -m

If the fastboot commands do not work for you in termux, you can use other app such as the bugjaeger to obtain information.

command to get product

fastboot getvar product

command to get token

fastboot getvar token

or for mtk

fastboot oem get_token