Failed to setup testnet locally
chenrui333 opened this issue · 7 comments
I have run make testnet LINK_STATICALLY=true successfully in my local, since I am running on macOS arm, I have commented out this block
ifeq ($(LINK_STATICALLY),true)
ldflags += -linkmode=external -extldflags "-Wl,-z,muldefs -static"
endif
Otherwise I would get ld: library not found for -lcrt0.o
Now I am trying to set up testnet reading this doc, https://www.okx.com/okc/docs/dev/quick-start/join-okc-testnet.html
But I am seeing this error when running exchaind init
The error is as below:
$ exchaind init ruitest --chain-id exchain-65 --home ~/.exchaind
ERROR: Must use <make testnet> to rebuild if chain-id is <exchain-65>, Current GenesisHeight is <0>
If I change chain-id from 65 to 67, it would pass (I saw in the tutorial video that the chain-id should be 67??).
Now with exchain-67, I got some validator error:
error during handshake: error on replay: validator set is nil in genesis and still empty after InitChain
Let me know if I need provide more info.
When you execute 'make', you will see output like this:
go install -v -ldflags '-X github.com/okex/exchain/libs/cosmos-sdk/version.Version=v1.6.8.5
-X github.com/okex/exchain/libs/cosmos-sdk/version.Name=exchain
-X github.com/okex/exchain/libs/cosmos-sdk/version.ServerName=exchaind
-X github.com/okex/exchain/libs/cosmos-sdk/version.ClientName=exchaincli
-X github.com/okex/exchain/libs/cosmos-sdk/version.Commit=71582060ed0ee1602b78bdce7c183c4ec4144456
-X github.com/okex/exchain/libs/cosmos-sdk/version.CosmosSDK=v0.39.2
-X github.com/okex/exchain/libs/cosmos-sdk/version.Tendermint=v0.33.9
-X "github.com/okex/exchain/libs/cosmos-sdk/version.BuildTags=netgo rocksdb muslc"
-X github.com/okex/exchain/libs/tendermint/types.MILESTONE_GENESIS_HEIGHT=1121818
-X github.com/okex/exchain/libs/tendermint/types.MILESTONE_MERCURY_HEIGHT=5300000
-X github.com/okex/exchain/libs/tendermint/types.MILESTONE_VENUS_HEIGHT=8510000
-X github.com/okex/exchain/libs/tendermint/types.MILESTONE_VENUS1_HEIGHT=12067000
-X github.com/okex/exchain/libs/tendermint/types.MILESTONE_VENUS2_HEIGHT=14781000
-X github.com/okex/exchain/libs/tendermint/types.MILESTONE_VENUS3_HEIGHT=15540000
-X github.com/okex/exchain/libs/tendermint/types.MILESTONE_VENUS4_HEIGHT=17531500
-X github.com/okex/exchain/libs/tendermint/types.MILESTONE_VENUS5_HEIGHT=18861500
-X github.com/okex/exchain/libs/tendermint/types.MILESTONE_EARTH_HEIGHT=17364500
-X github.com/okex/exchain/libs/tendermint/types.MILESTONE_MARS_HEIGHT=0
-X github.com/okex/exchain/libs/tendermint/types.DBBackend=rocksdb
-X github.com/okex/exchain/libs/cosmos-sdk/server.ChainID=exchain-65'
-tags "netgo rocksdb muslc" ./cmd/exchaind
You may notice that 'types.MILESTONE_GENESIS_HEIGHT' is set to 1121818. When 'make testnet' is executed, some parameters are set to match the network configuration of OKC testnet, whose chain ID is 65. If you compile 'exchaind' using 'make testnet' and configure it with a chain ID other than 65, it will report an error, for example.
exchaind init ruitest --chain-id exchain-66
ERROR: Must use <make mainnet> to rebuild if chain-id is <exchain-66>, Current GenesisHeight is <1121818>
it shows 'GenesisHeight is <1121818>', the same as the one passed when executing 'make', while your output shows 'Current GenesisHeight is <0>', so it doesn't seem like the testnet configuration is being used. Could you try executing 'make testnet' again and observe the output of 'make'?
By the way, may I ask if you intend to run a testnet node or just need to start some test nodes locally without joining the testnet?
When you execute 'make', you will see output like this:
go install -v -ldflags '-X github.com/okex/exchain/libs/cosmos-sdk/version.Version=v1.6.8.5 -X github.com/okex/exchain/libs/cosmos-sdk/version.Name=exchain -X github.com/okex/exchain/libs/cosmos-sdk/version.ServerName=exchaind -X github.com/okex/exchain/libs/cosmos-sdk/version.ClientName=exchaincli -X github.com/okex/exchain/libs/cosmos-sdk/version.Commit=71582060ed0ee1602b78bdce7c183c4ec4144456 -X github.com/okex/exchain/libs/cosmos-sdk/version.CosmosSDK=v0.39.2 -X github.com/okex/exchain/libs/cosmos-sdk/version.Tendermint=v0.33.9 -X "github.com/okex/exchain/libs/cosmos-sdk/version.BuildTags=netgo rocksdb muslc" -X github.com/okex/exchain/libs/tendermint/types.MILESTONE_GENESIS_HEIGHT=1121818 -X github.com/okex/exchain/libs/tendermint/types.MILESTONE_MERCURY_HEIGHT=5300000 -X github.com/okex/exchain/libs/tendermint/types.MILESTONE_VENUS_HEIGHT=8510000 -X github.com/okex/exchain/libs/tendermint/types.MILESTONE_VENUS1_HEIGHT=12067000 -X github.com/okex/exchain/libs/tendermint/types.MILESTONE_VENUS2_HEIGHT=14781000 -X github.com/okex/exchain/libs/tendermint/types.MILESTONE_VENUS3_HEIGHT=15540000 -X github.com/okex/exchain/libs/tendermint/types.MILESTONE_VENUS4_HEIGHT=17531500 -X github.com/okex/exchain/libs/tendermint/types.MILESTONE_VENUS5_HEIGHT=18861500 -X github.com/okex/exchain/libs/tendermint/types.MILESTONE_EARTH_HEIGHT=17364500 -X github.com/okex/exchain/libs/tendermint/types.MILESTONE_MARS_HEIGHT=0 -X github.com/okex/exchain/libs/tendermint/types.DBBackend=rocksdb -X github.com/okex/exchain/libs/cosmos-sdk/server.ChainID=exchain-65' -tags "netgo rocksdb muslc" ./cmd/exchaindYou may notice that 'types.MILESTONE_GENESIS_HEIGHT' is set to 1121818. When 'make testnet' is executed, some parameters are set to match the network configuration of OKC testnet, whose chain ID is 65. If you compile 'exchaind' using 'make testnet' and configure it with a chain ID other than 65, it will report an error, for example.
exchaind init ruitest --chain-id exchain-66 ERROR: Must use <make mainnet> to rebuild if chain-id is <exchain-66>, Current GenesisHeight is <1121818>it shows 'GenesisHeight is <1121818>', the same as the one passed when executing 'make', while your output shows 'Current GenesisHeight is <0>', so it doesn't seem like the testnet configuration is being used. Could you try executing 'make testnet' again and observe the output of 'make'?
this is what I have
CGO_CFLAGS="-I/opt/homebrew/Cellar/rocksdb/6.27.3_1/include" CGO_LDFLAGS="-L/opt/homebrew/Cellar/rocksdb/6.27.3_1/lib -lrocksdb -lstdc++ -lm -lsnappy -llz4" go install -v -ldflags '-X github.com/okex/exchain/libs/cosmos-sdk/version.Version=v1.6.8.5 -X github.com/okex/exchain/libs/cosmos-sdk/version.Name=exchain -X github.com/okex/exchain/libs/cosmos-sdk/version.ServerName=exchaind -X github.com/okex/exchain/libs/cosmos-sdk/version.ClientName=exchaincli -X github.com/okex/exchain/libs/cosmos-sdk/version.Commit=34fc925e1713697c27da5d358f9d5d37c52d2b22 -X github.com/okex/exchain/libs/cosmos-sdk/version.CosmosSDK=v0.39.2 -X github.com/okex/exchain/libs/cosmos-sdk/version.Tendermint=v0.33.9 -X "github.com/okex/exchain/libs/cosmos-sdk/version.BuildTags=netgo rocksdb muslc" -X github.com/okex/exchain/libs/tendermint/types.MILESTONE_GENESIS_HEIGHT=1121818 -X github.com/okex/exchain/libs/tendermint/types.MILESTONE_MERCURY_HEIGHT=5300000 -X github.com/okex/exchain/libs/tendermint/types.MILESTONE_VENUS_HEIGHT=8510000 -X github.com/okex/exchain/libs/tendermint/types.MILESTONE_VENUS1_HEIGHT=12067000 -X github.com/okex/exchain/libs/tendermint/types.MILESTONE_VENUS2_HEIGHT=14781000 -X github.com/okex/exchain/libs/tendermint/types.MILESTONE_VENUS3_HEIGHT=15540000 -X github.com/okex/exchain/libs/tendermint/types.MILESTONE_VENUS4_HEIGHT=17531500 -X github.com/okex/exchain/libs/tendermint/types.MILESTONE_VENUS5_HEIGHT=18861500 -X github.com/okex/exchain/libs/tendermint/types.MILESTONE_EARTH_HEIGHT=17364500 -X github.com/okex/exchain/libs/tendermint/types.MILESTONE_MARS_HEIGHT=0 -X github.com/okex/exchain/libs/tendermint/types.DBBackend=rocksdb -X github.com/okex/exchain/libs/cosmos-sdk/server.ChainID=exchain-65' -tags "netgo rocksdb muslc" ./cmd/exchaincli
By the way, may I ask if you intend to run a testnet node or just need to start some test nodes locally without joining the testnet?
personally, I dont want to join the testnet due to the storage concern (I only have 80gb free space on my laptop), but I did not see any guides on how to deploy the contract into testnet (I am a newbie, any pointer on it?)
If you run "exchaind init", will it still report the previous error?
If you want to deploy a contract on the testnet, use https://exchaintestrpc.okex.org/ with chainid 65. Then you can use the testnet like any other EVM-compatible chain. The API documentation is available at https://www.okx.com/okc/docs/dev/api/okc-api/json-rpc-api.html. You can get test OKT tokens here: https://www.okx.com/okc/faucet.
If you run "exchaind init", will it still report the previous error?
Yeah, even after the build I still have exchaind init, only after changing the chain id, I can get it working.
If you want to deploy a contract on the testnet, use https://exchaintestrpc.okex.org/ with chainid 65. Then you can use the testnet like any other EVM-compatible chain. The API documentation is available at https://www.okx.com/okc/docs/dev/api/okc-api/json-rpc-api.html. You can get test OKT tokens here: https://www.okx.com/okc/faucet.
I will check it out, I think I need that more than building my own, thanks!
如何修改 chainID exchain-65 为兼容evm的 1028等整数iD？