Add special cluster attributes for Tuya TS130f cover switch
FranzSchi opened this issue · 4 comments
Guidelines
Delete this section in your issue...
Please add the special cluster attributes for Tuya TS130f cover switch (And Rollershutter) as it is discussed here to allow the calibratoin mode:
https://community.openhab.org/t/ts130f-rollershutter-controller-via-zigbee-binding/107687/5
Details should be specified here:
[[I added special Tuya attributes to cluster 'genOnOff' and 'closuresWindowCovering' for support of the Tuya TS130f RollerShutter switch. Discussed at Koenkk/zigbee2mqtt#4257](https://github.com/Koenkk/zigbee-herdsman/pull/240)](Koenkk/zigbee-herdsman#240)
openhab> zigbee endpoint 20561/1
IEEE Address : A4C1382E683CB5F8
Network Address : 20561
Endpoint : 1
Device Profile : 0x0104, ZIGBEE_HOME_AUTOMATION
Device Type : 0x0202, WINDOW_COVERING_DEVICE
Device Version : 1
Input Clusters : (Server)
0000 Basic
- APS Security disabled
S 0 r-- UNSIGNED_8_BIT_INTEGER ZCL Version Fri Jan 07 12:29:57 CET 2022 3
S 1 r-- UNSIGNED_8_BIT_INTEGER Application Version Fri Jan 07 12:29:57 CET 2022 67
S 2 r-- UNSIGNED_8_BIT_INTEGER Stack Version Fri Jan 07 12:29:57 CET 2022 0
S 3 r-- UNSIGNED_8_BIT_INTEGER HW Version Fri Jan 07 12:29:57 CET 2022 1
S 4 r-- CHARACTER_STRING Manufacturer Name Fri Jan 07 12:29:57 CET 2022 _TZ3000_dbpmpco1
S 5 r-- CHARACTER_STRING Model Identifier Fri Jan 07 12:29:57 CET 2022 TS130F
S 6 r-- CHARACTER_STRING Date Code Fri Jan 07 12:29:57 CET 2022
S 7 r-- ENUMERATION_8_BIT Power Source Fri Jan 07 18:44:18 CET 2022 1
S 8 r-- ENUMERATION_8_BIT Generic Device Class
S 9 r-- ENUMERATION_8_BIT Generic Device Type
S 10 r-- CHARACTER_STRING Product Code
S 11 r-- CHARACTER_STRING Product URL
S 16 rw- CHARACTER_STRING Location Description
S 17 rw- ENUMERATION_8_BIT Physical Environment
S 18 rw- BOOLEAN Device Enabled
S 19 rw- BITMAP_8_BIT Alarm Mask
S 20 rw- BITMAP_8_BIT Disable Local Config
S 16384 r-- CHARACTER_STRING SW Build ID
0004 Groups
- APS Security disabled
S 0 r-- BITMAP_8_BIT Name Support
0005 Scenes
- APS Security disabled
S 0 r-- UNSIGNED_8_BIT_INTEGER Scene Count
S 1 r-- UNSIGNED_8_BIT_INTEGER Current Scene
S 2 r-- UNSIGNED_16_BIT_INTEGER Current Group
S 3 r-- BOOLEAN Scene Valid
S 4 r-- BITMAP_8_BIT Name Support
S 5 r-- IEEE_ADDRESS Last Configured By
0006 On/Off
- APS Security disabled
U 0 r-s BOOLEAN On Off
U 16384 r-- BOOLEAN Global Scene Control
S 16385 rw- UNSIGNED_16_BIT_INTEGER On Time
S 16386 rw- UNSIGNED_16_BIT_INTEGER Off Wait Time
U 16387 rw- ENUMERATION_8_BIT Start Up On Off
0102 Window Covering
- APS Security disabled
S 0 r-- ENUMERATION_8_BIT Window Covering Type
S 1 r-- UNSIGNED_16_BIT_INTEGER Physical Closed Limit - Lift
S 2 r-- UNSIGNED_16_BIT_INTEGER Physical Closed Limit - Tilt
S 3 r-- UNSIGNED_16_BIT_INTEGER Current Position - Lift
S 4 r-- UNSIGNED_16_BIT_INTEGER Current Position - Tilt
S 5 r-- UNSIGNED_16_BIT_INTEGER Number Of Actuations - Lift
S 6 r-- UNSIGNED_16_BIT_INTEGER Number Of Actuations - Tilt
S 7 r-- BITMAP_8_BIT Config Status
S 8 r-- UNSIGNED_8_BIT_INTEGER Current Position Lift Percentage Fri Jan 07 19:17:53 CET 2022 100
S 9 r-- UNSIGNED_8_BIT_INTEGER Current Position Tilt Percentage
S 16 r-- UNSIGNED_16_BIT_INTEGER Installed Open Limit - Lift
S 17 r-- UNSIGNED_16_BIT_INTEGER Installed Closed Limit - Lift
S 18 r-- UNSIGNED_16_BIT_INTEGER Installed Open Limit - Tilt
S 19 r-- UNSIGNED_16_BIT_INTEGER Installed Closed Limit - Tilt
S 20 rws UNSIGNED_16_BIT_INTEGER Velocity - Lift
S 21 rws UNSIGNED_16_BIT_INTEGER Acceleration Time - Lift
S 22 rws UNSIGNED_16_BIT_INTEGER Deceleration Time - Lift
S 23 rws BITMAP_8_BIT Mode
S 24 rws OCTET_STRING Intermediate Setpoints - Lift
S 25 rws OCTET_STRING Intermediate Setpoints - Tilt
Output Clusters : (Client)
000A Time
- APS Security disabled
0019 Ota Upgrade
- APS Security disabled
S 0 r-- IEEE_ADDRESS Upgrade Server ID
S 1 r-- UNSIGNED_32_BIT_INTEGER File Offset
S 2 r-- UNSIGNED_32_BIT_INTEGER Current File Version Fri Jan 07 12:29:57 CET 2022 67
S 3 r-- UNSIGNED_16_BIT_INTEGER Current ZigBee Stack Version
S 4 r-- UNSIGNED_32_BIT_INTEGER Downloaded File Version
S 5 r-- UNSIGNED_16_BIT_INTEGER Downloaded ZigBee Stack Version
S 6 r-- ENUMERATION_8_BIT Image Upgrade Status
S 7 r-- UNSIGNED_16_BIT_INTEGER Manufacturer ID
S 8 r-- UNSIGNED_16_BIT_INTEGER Image Type ID
S 9 r-- UNSIGNED_16_BIT_INTEGER Minimum Block Request Period
S 10 r-- UNSIGNED_32_BIT_INTEGER Image Stamp
Groups Supported : 32
Groups Configured : 0
Outline
We are not able to run the calibration mode.
Configuration
Ember Coordinator
Logs
Here is the XML of the device detection
A4C1382E683CB5F8.zip
This issue has been mentioned on openHAB Community. There might be relevant details there:
https://community.openhab.org/t/ts130f-rollershutter-controller-via-zigbee-binding/107687/8
Please can you define the attributes required to be supported.
Hi Chris,
thanks for your fast reply, I really appreciate that.
I guess we need this properties:
tuyaMovingState: { ID: 0xf000, type: dataType_1.default.enum8 }, - Not so critical
tuyaCalibration: { ID: 0xf001, type: dataType_1.default.enum8 }, - very much needed
tuyaMotorReversal: { ID: 0xf002, type: dataType_1.default.enum8 }, - would be nice
Cluster | CMD | Attributes | Data Type | Value | Description
(0x0102) | Write Attributes (0x02) | 0xf002 | 8-Bit (0x30) | 1 (0x01) | Motor reversal on
(0x0102) | Write Attributes (0x02) | 0xf002 | 8-Bit (0x30) | 0 (0x00) | Motor reversal off
(0x0102) | Write Attributes (0x02) | 0xf001 | 8-Bit (0x30) | 0 (0x00) | Start Calibration
(0x0102) | Write Attributes (0x02) | 0xf001 | 8-Bit (0x30) | 1 (0x01) | End Calibration
(0x0006) | Write Attributes (0x02) | 0x8001 | 8-Bit (0x30) | 0 (0x00) | Light Mode 1
(0x0006) | Write Attributes (0x02) | 0x8001 | 8-Bit (0x30) | 1 (0x01) | Light Mode 2
(0x0006) | Write Attributes (0x02) | 0x8001 | 8-Bit (0x30) | 2 (0x02) | Light Mode 3
(0x0102) | Command (0x00) | | | | open
(0x0102) | Command (0x01) | | | | close
(0x0102) | Command (0x02) | | | | stopp
(0x0102) | Report Attributes (0x0a) | 0x0008 | 8-Bit (0x20) | 0 (0x00) | Position 0%
(0x0102) | Report Attributes (0x0a) | 0x0008 | 8-Bit (0x20) | 100 (0x64) | Position 100%
(0x0102) | Report Attributes (0x0a) | 0xf000 | 8-Bit (0x30) | 0 (0x00) | Moving up
(0x0102) | Report Attributes (0x0a) | 0xf000 | 8-Bit (0x30) | 1 (0x01) | Stopp
(0x0102) | Report Attributes (0x0a) | 0xf000 | 8-Bit (0x30) | 2 (0x02) | Moving down
May Greetings
/Franz
Hi,
just as an info for the others, I've just calibrated my RollerShutter.
Replace "20561/1" with your node ID
Start Calibration:
openhab> zigbee write 20561/1 258 61441 0 ENUMERATION_8_BIT
Attribute value write success.
End Calibration:
openhab> zigbee write 20561/1 258 61441 1 ENUMERATION_8_BIT
Attribute value write success.
Follow this Procedure:
https://www.zigbee2mqtt.io/devices/TS130F.html
BR
/Franz