oresat/oresat-dxwifi-hardware

Issues

• Attenuator between RF input and matching network causes matching issue

  #35 opened 10 months ago by ojones808
  0

• Solder mask not completely removed from RF path

  #34 opened 10 months ago by ojones808
  0

• Wrong netclass on several RF nets

  #33 opened 10 months ago by ojones808
  0

• Add pulldown on FULLPWRMGMTz/SMBA1

  #30 opened a year ago by cesarordaz
  0

• Q5 and Q6 are backward

  #31 opened a year ago by andrewgreenberg
  0

• Remove D14 from OPD

  #32 opened a year ago by andrewgreenberg
  0

• Connect 5V to USB1_VBUS

  #29 opened a year ago by cesarordaz
  0

• Fix Q5 and Q6 symbol pinout

  #28 opened a year ago by cesarordaz
  0

• Solder stop on SMPM missing

  #27 opened 2 years ago by NickLekas
  0

• LED's are too goddamn bright!!!!1!!1!!!

  #26 opened 2 years ago by NickLekas
  0

• Fix broken 1.1V schematic symbol

  #25 opened 2 years ago by NickLekas
  1

• Length match SD card lines

  #24 opened 2 years ago by NickLekas
  0

• Replace TP55 with tht

  #23 opened 2 years ago by NickLekas
  0

• Add tht boot jumper

  #22 opened 2 years ago by NickLekas
  0

• Connect VIN_USB to the 5v rail

  #21 opened 2 years ago by NickLekas
  0

• SD card slot frame interferance

  #20 opened 2 years ago by NickLekas
  0

• Schematic PDF mangled

  #19 opened 2 years ago by RussellSenior
  0

• Missing symbol file

  #15 opened 2 years ago by davidalay
  2

• Fix boot jumper placement

  #18 opened 2 years ago by NickLekas
  0

• Connect OPD UART to UART0

  #16 opened 2 years ago by cesarordaz
  1

• Change attributes to reflect the BOM changes.

  #14 opened 2 years ago by davidalay
  1

• Change reference path of the title block to work with the kicad plugin. Correct title block is in the oresat-kicad repo.

  #13 opened 2 years ago by davidalay
  1

• Fix ground on layers 2 and 3 under 5V SPS ICs

  #17 opened 2 years ago by andrewgreenberg
  0

• Add zero ohm resistors on the outputs of all switching power supplies.

  #8 opened 3 years ago by andrewgreenberg
  0

• Make the SD card slot usable

  #10 opened 3 years ago by oliver-rew
  0

• Calculate R50 and R51 on the circuit breaker

  #11 opened 3 years ago by davidalay
  0

• Port card design from Eagle to KiCAD

  #12 opened 3 years ago by davidalay
  0

• Placeholder: Connect USB1_VBUS to USB VDD in such a way that the USB hub enumerates correctly

  #9 opened 3 years ago by oliver-rew
  1

• All power for the WF should come from the Octavo

  #7 opened 4 years ago by NickLekas
  2

• Needs fiducial

  #4 opened 4 years ago by andrewgreenberg
  1

• Missing RF tStop

  #3 opened 4 years ago by NickLekas
  1

• Switch JP107 footprint so it has a fixed pullup

  #5 opened 4 years ago by NickLekas
  1

• eMMC data line going through Vss

  #6 opened 4 years ago by NickLekas
  0

• C20 is 0603 cap on 0402 footprint

  #2 opened 4 years ago by davidalay
  1