Apache Camel K (a.k.a. Kamel) is a lightweight integration framework built from Apache Camel that runs natively on Kubernetes and is specifically designed for serverless and microservice architectures.
Camel K allows to run integrations directly on a Kubernetes or OpenShift cluster. To use it, you need to be connected to a cloud environment or to a local cluster created for development purposes.
If you need help on how to create a local development environment based on Minishift or Minikube, you can follow the local cluster setup guide.
Make sure you apply specific configuration settings for your cluster before installing Camel K. Customized instructions are needed for the following cluster types:
Other cluster types (such as OpenShift clusters) should not need prior configuration.
To start using Camel K you need the "kamel" binary, that can be used to both configure the cluster and run integrations.
Look into the release page for latest version of the kamel tool.
If you want to contribute, you can also build it from source! Refer to the developer’s guide for information on how to do it.
Once you have the "kamel" binary, log into your cluster using the standard "oc" (OpenShift) or "kubectl" (Kubernetes) client tool and execute the following command to install Camel K:
kamel installThis will configure the cluster with the Camel K custom resource definitions and install the operator on the current namespace.
|
Important
|
Custom Resource Definitions (CRD) are cluster-wide objects and you need admin rights to install them. Fortunately this
operation can be done once per cluster. So, if the kamel install operation fails, you’ll be asked to repeat it when logged as admin.
For Minishift, this means executing oc login -u system:admin then kamel install --cluster-setup only for first-time installation.
|
After the initial setup, you can run a Camel integration on the cluster by executing:
kamel run examples/Sample.javaA "Sample.java" file is included in the /examples folder of this repository. You can change the content of the file and execute the command again to see the changes.
Properties associated to an integration can be configured either using a ConfigMap/Secret or by setting using the "--property" flag, i.e.
kamel run --property my.message=test examples/props.jscamel-k runtime uses log4j2 as logging framework and can be configured through integration properties.
If you need to change the logging level of various loggers, you can do so by using the logging.level prefix:
logging.level.org.apache.camel = DEBUGcamel-k component can be configured programmatically inside an integration or using properties with the following syntax.
camel.component.${scheme}.${property} = ${value}As example if you want to change the queue size of the seda component, you can use the following property:
camel.component.seda.queueSize = 10If you want to iterate quickly on an integration to have fast feedback on the code you’re writing, you can use by running it in "dev" mode:
kamel run examples/Sample.java --devThe --dev flag deploys immediately the integration and shows the integration logs in the console. You can then change the code and see
the changes automatically applied (instantly) to the remote integration pod.
The console follows automatically all redeploys of the integration.
Here’s an example of the output:
[nferraro@localhost camel-k]$ kamel run examples/Sample.java --dev
integration "sample" created
integration "sample" in phase Building
integration "sample" in phase Deploying
integration "sample" in phase Running
[1] Monitoring pod sample-776db787c4-zjhfr[1] Starting the Java application using /opt/run-java/run-java.sh ...
[1] exec java -javaagent:/opt/prometheus/jmx_prometheus_javaagent.jar=9779:/opt/prometheus/prometheus-config.yml -XX:+UseParallelGC -XX:GCTimeRatio=4 -XX:AdaptiveSizePolicyWeight=90 -XX:MinHeapFreeRatio=20 -XX:MaxHeapFreeRatio=40 -XX:+ExitOnOutOfMemoryError -cp .:/deployments/* org.apache.camel.k.jvm.Application
[1] [INFO ] 2018-09-20 21:24:35.953 [main] Application - Routes: file:/etc/camel/conf/Sample.java
[1] [INFO ] 2018-09-20 21:24:35.955 [main] Application - Language: java
[1] [INFO ] 2018-09-20 21:24:35.956 [main] Application - Locations: file:/etc/camel/conf/application.properties
[1] [INFO ] 2018-09-20 21:24:36.506 [main] DefaultCamelContext - Apache Camel 2.22.1 (CamelContext: camel-1) is starting
[1] [INFO ] 2018-09-20 21:24:36.578 [main] ManagedManagementStrategy - JMX is enabled
[1] [INFO ] 2018-09-20 21:24:36.680 [main] DefaultTypeConverter - Type converters loaded (core: 195, classpath: 0)
[1] [INFO ] 2018-09-20 21:24:36.777 [main] DefaultCamelContext - StreamCaching is not in use. If using streams then its recommended to enable stream caching. See more details at http://camel.apache.org/stream-caching.html
[1] [INFO ] 2018-09-20 21:24:36.817 [main] DefaultCamelContext - Route: route1 started and consuming from: timer://tick
[1] [INFO ] 2018-09-20 21:24:36.818 [main] DefaultCamelContext - Total 1 routes, of which 1 are started
[1] [INFO ] 2018-09-20 21:24:36.820 [main] DefaultCamelContext - Apache Camel 2.22.1 (CamelContext: camel-1) started in 0.314 secondsCamel components used in an integration are automatically resolved. For example, take the following integration:
from("imap://admin@myserver.com")
.to("seda:output")Since the integration is using the "imap:" prefix, Camel K is able to automatically add the "camel-mail" component to the list of required dependencies. This will be transparent to the user, that will just see the integration running.
Automatic resolution is also a nice feature in --dev mode, because you are allowed to add all components you need without exiting the dev loop.
You can also use the -d flag to pass additional explicit dependencies to the Camel client tool:
kamel run -d mvn:com.google.guava:guava:26.0-jre -d camel-mina2 Integration.javaCamel K supports multiple languages for writing integrations:
| Language | Description |
|---|---|
Java |
Both integrations in source |
XML |
Integrations written in plain XML DSL are supported (Spring XML or Blueprint not supported). |
Groovy |
Groovy |
JavaScript |
JavaScript |
Kotlin |
Kotlin Script |
More information about supported languages is provided in the languages guide.
Integrations written in different languages are provided in the examples directory.
An example of integration written in JavaScript is the /examples/dns.js integration. Here’s the content:
// Lookup every second the 'www.google.com' domain name and log the output
from('timer:dns?period=1s')
.routeId('dns')
.setHeader('dns.domain')
.constant('www.google.com')
.to('dns:ip')
.to('log:dns');To run it, you need just to execute:
kamel run examples/dns.jsThe details of how the integration is mapped into Kubernetes resources can be customized using traits. More information is provided in the traits section.
We love contributions and we want to make Camel K great!
Contributing is easy, just take a look at our developer’s guide.
If you really need to, it is possible to completely uninstall Camel K from OpenShift or Kubernetes with the following command, using the "oc" or "kubectl" tool:
# kubectl on plain Kubernetes
oc delete all,pvc,configmap,rolebindings,clusterrolebindings,secrets,sa,roles,clusterroles,crd -l 'app=camel-k'