ostat/gridfinity_extended_openscad

Baseplate issues

Closed this issue · 6 comments

elbelga commented

I dont not why but baseplate is cut on both sides

image
ostat commented

can you double check debug cutx and cuty are not enabled? These are used to be able to get a side view of the model when in preview.
image

I notice you have warnings? please check you have the latest version.
Aside, Turn off the Base plate clips, they should not be enabled by default, I will fix that.

image

elbelga commented

I have the latest version
image

I set the same config but it doesnt works properly
image

I dont know if it is related but I have this warnings in console

[WARNING: Ignoring unknown variable 'butterflyClipEnabled' in file gridfinity_baseplate.scad, line 191](https://github.com/ostat/gridfinity_extended_openscad/issues/191,/Users/belga/Documents/gridfinity_extended_openscad/gridfinity_baseplate.scad) [WARNING: Ignoring unknown variable 'butterflyClipSize' in file gridfinity_baseplate.scad, line 192](https://github.com/ostat/gridfinity_extended_openscad/issues/192,/Users/belga/Documents/gridfinity_extended_openscad/gridfinity_baseplate.scad) [WARNING: Ignoring unknown variable 'butterflyClipRadius' in file gridfinity_baseplate.scad, line 193](https://github.com/ostat/gridfinity_extended_openscad/issues/193,/Users/belga/Documents/gridfinity_extended_openscad/gridfinity_baseplate.scad) [WARNING: Ignoring unknown variable 'filamentClipEnabled' in file gridfinity_baseplate.scad, line 194](https://github.com/ostat/gridfinity_extended_openscad/issues/194,/Users/belga/Documents/gridfinity_extended_openscad/gridfinity_baseplate.scad) [WARNING: Ignoring unknown variable 'filamentClipDiameter' in file gridfinity_baseplate.scad, line 195](https://github.com/ostat/gridfinity_extended_openscad/issues/195,/Users/belga/Documents/gridfinity_extended_openscad/gridfinity_baseplate.scad) [WARNING: Ignoring unknown variable 'filamentClipLength' in file gridfinity_baseplate.scad, line 196](https://github.com/ostat/gridfinity_extended_openscad/issues/196,/Users/belga/Documents/gridfinity_extended_openscad/gridfinity_baseplate.scad) [WARNING: Ignoring unknown variable '$idx' in file gridfinity_baseplate.scad, line 458](https://github.com/ostat/gridfinity_extended_openscad/issues/458,/Users/belga/Documents/gridfinity_extended_openscad/gridfinity_baseplate.scad) [WARNING: Ignoring unknown variable '$idx' in file gridfinity_baseplate.scad, line 458](https://github.com/ostat/gridfinity_extended_openscad/issues/458,/Users/belga/Documents/gridfinity_extended_openscad/gridfinity_baseplate.scad) [WARNING: Ignoring unknown variable '$idx' in file gridfinity_baseplate.scad, line 460](https://github.com/ostat/gridfinity_extended_openscad/issues/460,/Users/belga/Documents/gridfinity_extended_openscad/gridfinity_baseplate.scad) [WARNING: Ignoring unknown variable '$idx' in file gridfinity_baseplate.scad, line 461](https://github.com/ostat/gridfinity_extended_openscad/issues/461,/Users/belga/Documents/gridfinity_extended_openscad/gridfinity_baseplate.scad)

elbelga commented

I believe is a problem with OpenScad version, with snapshot version works well

ostat commented

Thanks for letting me know.
I think I can add a check for the version, so the issue is clearer.

ostat commented

I have added a check to assert version of OpenSCAD

lied commented

can you please put a info to the repo readme that the version of OpenSCAD needs to be the snapshot version? I've had the same issue (Mac OSX).