Remaning time always stays the same

Question

Remaning time always stays the same

Closed this issue 7 months ago · 6 comments

xtypebox commented 8 months ago

Hello,

In my configuration the Remaning time always stays the same, so the switch doesn't turn off after the time I set.

Thanks

Answer 1 · 2024-04-16T22:01:41.000Z

Hi,

Can you check you log for errors, and send me screen shots of you config.

Some people have found a restart of HA can help.

Answer 2 · 2024-04-17T20:12:27.000Z

I also have the same issue, but only occurs with 1 zone. The last one.
Basically when this zone quicks in, the program finishes, not counting down that zone and thus never ending. This only occurred after one of the last updates, before it was perfect.

Already rebooted HA.

Answer 3 · 2024-04-17T20:18:48.000Z

It seems that deleting the zone and adding it again solved it.

Answer 4 · 2024-04-17T20:45:56.000Z

That is odd, indicates the config was corrupted during an update.

Answer 5 · 2024-05-01T04:27:48.000Z

I have been looking into this issue. The behaviour you describe happens when the zone switch is not available or has significant latency/does not update state fast enough.

I have tweaked the code to handle the unavailable switch scenario better, I will include this in the next release.

There is not much I can do where the switch does not change state within 10 seconds of being started in this case the zone may start and not be turned off.

Answer 6 · 2024-05-16T03:19:48.000Z

V5.4.15 adds better treatment for 0 time, highlighting that the zone is currently disabled.