Got some warnings in optimize NHA
Closed this issue · 1 comments
lucasjinreal commented
y be incomplete. To solve, try increasing max_faces_per_bin / max_points_per_bin, decreasing bin_size, or setting bin_size to -1 to use the naive rasterization.Bin size was too small in the coarse rasterization phase. This caused an overflow, meaning output may be incomplete. To solve, try increasing max_faces_per_bin / max_points_per_bin, decreasing bin_size, or setting bin_size to -1 to use the naive rasterization.Bin size was too small in the coarse rasterization phase. This caused an overflow, meaning output may be incomplete. To solve, try increasing max_faces_per_bin / max_points_per_bin, decreasing bin_size, or setting bin_size to -1 to use the naive rasterization.Bin size was too small in the coarse rasterization phase. This caused an overflow, meaning output may be incomplete. To solve, try increasing max_faces_per_bin / max_points_per_bin, decreasing bin_size, or setting bin_size to -1 to use the naive rasterization.Bin size was too small in the coarse rasterization phase. This caused an overflow, meaning output may be incomplete. To solve, try increasing max_faces_per_bin / max_points_per_bin, decreasing bin_size, or setting bin_size to -1 to use the naive rasterization.Bin size was too small in the coarse rasterization phase. This caused an overflow, meaning output may be incomplete. To solve, try increasing max_faces_per_bin / max_points_per_bin, decreasing bin_size, or setting bin_size to -1 to use the naive rasterization.Bin size was too small in the coarse rasterization phase. This caused an overflow, meaning output may be incomplete. To solve, try increasing max_faces_per_bin / max_points_per_bin, decreasing bin_size, or setting bin_size to -1 to use the naive rasterization.Bin size was too small in the coarse rasterization phase. This caused an overflow, meaning output may be incomplete. To solve, try increasing max_faces_per_bin / max_points_per_bin, decreasing bin_size, or setting bin_size to -1 to use the naive rasterization.Bin size was too small in the coarse rasterization phase. This caused an overflow, meaning output may be incomplete. To solve, try increasing max_faces_per_bin / max_points_per_bin, decreasing bin_size, or setting bin_size to -1 to use the naive rasterization.Bin size was too small in the coarse rasterization phase. This caused an overflow, meaning output may be incomplete. To solve, try increasing max_faces_per_bin / max_points_per_bin, decreasing bin_size, or setting bin_size to -1 to use the naive rasterization.Bin size was too small in the coarse rasterization phase. This caused an overflow, meaning output may be incomplete. To solve, try increasing max_faces_per_bin / max_points_per_bin, decreasing bin_size, or setting bin_size to -1 to use the naive rasterization.Bin size was too small in the coarse rasterization phase. This caused an overflow, meaning output may be incomplete. To solve, try increasing max_faces_per_bin / max_points_per_bin, decreasing bin_size, or setting bin_size to -1 to use the naive rasterization.Bin size was too small in the coarse rasterization phase. This caused an overflow, meaning output may be incomplete. To solve, try increasing max_faces_per_bin / max_points_per_bin, decreasing bin_size, or setting bin_size to -1 to use the naive rasterization.Bin size was too small in the coarse rasterization phase. This caused an overflow, meaning output may be incomplete. To solve, try increasing max_faces_per_bin / max_points_per_bin, decreasing bin_size, or setting bin_size to -1 to use the naive rasterization.Bin size was too small in the coarse rasterization phase. This caused an overflow, meaning output may be incomplete. To solve, try increasing max_faces_per_bin / max_points_per_bin, decreasing bin_size, or setting bin_size to -1 to use the naive rasterization.Bin size was too small in the coarse rasterization phase. This caused an overflow, meaning output may be incomplete. To solve, try increasing max_faces_per_bin / max_points_per_bin, decreasing bin_size, or setting bin_size to -1 to use the naive rasterization.Bin size was too small in the coarse rasterization phase. This caused an overflow, meaning output may be incomplete. To solve, try increasing max_faces_per_bin / max_points_per_bin, decreasing bin_size, or setting bin_size to -1 to use the naive rasterization.Bin size was too small in the coarse rasterization phase. This caused an overflow, meaning output may be incomplete. To solve, try increasing max_faces_per_bin / max_points_per_bin, decreasing bin_size, or setting bin_size to -1 to use the naive rasterization.Bin size was too small in the coarse rasterization phase. This caused an overflow, meaning output may be incomplete. To solve, try increasing max_faces_per_bin / max_points_per_bin, decreasing bin_size, or setting bin_size to -1 to use the naive rasterization.Bin size was too small in the coarse rasterization phase. This caused an overflow, meaning output may be incomplete. To solve, try increasing max_faces_per_bin / max_points_per_bin, decreasing bin_size, or setting bin_size to -1 to use the naive rasterization.Bin size was too small in the coars
I am using train batchsize == 8 instead 16. Any instructions?
malteprinzler commented
This problem arises from how the used rasterizer works. In short: to make the rasterization more efficient, the rendered volume is subdivided into bins. If there are too many primitives per bin, there is an overflow and the renderer might return incomplete results. Please refer to the in-detail explanation here: facebookresearch/pytorch3d#348
To fix the issue, please consider changing the values for bin_size and faces_per_bin here:
Please refer to the official pytorch3d documentation for information on how to set these values properly for your demands https://pytorch3d.readthedocs.io/en/latest/modules/renderer/rasterizer.html