philpem/freebee

Issues

• Emulate expansion cards

  #11 opened 5 years ago by philpem
  1

• topic addition for better community reach

  #51 opened 2 years ago by Wladefant
  1

• Running freebee help

  #50 opened 3 years ago by Xuser641
  2

• Setting base_memory to 512 and extended_memory to 0 results in trouble booting

  #47 opened 3 years ago by agentbooth
  7

• Optimization needed for Raspberry Pi

  #45 opened 4 years ago by agentbooth
  4

• Add configuration file support

  #9 opened 4 years ago by philpem
  2

• How, EXACTLY, do I access a DOS disk image?

  #37 opened 4 years ago by KedalionDaimon
  4

• Emulate serial port

  #1 opened 4 years ago by philpem
  3

• Unix 3.51m kernel panics on large disk

  #30 opened 4 years ago by arnoldrobbins
  13

• UNIX 3.51 hangs on second boot after install due to lack of modem emulation

  #13 opened 5 years ago by philpem
  6

• Smarter hard disk image support (header?)

  #10 opened 4 years ago by philpem
  2

• Finish P5.1 emulation - second hard disk

  #4 opened 4 years ago by philpem
  34

• no SDL output on macOS

  #23 opened 4 years ago by tenox7
  11

• Add ImageDisk floppy image read-write support

  #8 opened 4 years ago by philpem
  2

• please don't use sed in makefile

  #21 opened 4 years ago by tenox7
  7

• Emulate VIDPAL expansion

  #12 opened 4 years ago by philpem
  1

• Clean up macro usage

  #19 opened 4 years ago by philpem
  0

• Kernel panic when running gzip or cc from the 3.51 Development Set

  #15 opened 4 years ago by philpem
  0

• SDL window size incorrect

  #16 opened 5 years ago by philpem
  0

• UNIX 3.51m fails to boot, hangs on Disk Ctrlr message

  #17 opened 5 years ago by philpem
  1

• Emulate MODEM

  #3 opened 5 years ago by philpem
  1

• Dismount failed errors while installing 3.51

  #14 opened 5 years ago by philpem
  2

• Add status line to main window

  #7 opened 5 years ago by philpem
  0

• Exiting with no mounted floppy disk causes segfault

  #6 opened 5 years ago by philpem
  0

• Emulate printer port

  #2 opened 5 years ago by philpem
  0