PiKVM for Intel NUC NUC11PAHI7
johnlockejrr opened this issue · 3 comments
Hi!
I want to order a PiKVM kit to manage my Intel NUC NUC11PAHI7. Anybody has tried and knows a success story? I can't seem to find the ATX pins on the NUC motherboard..., never had one before and I'm used to "normal" motherboards.
Thanks for your help! As sorry if I bother...
Hello! NUC does not have a standard ATX and for control you will have to figure out the pinout and connection of LEDs and buttons. But otherwise everything should work.
Thanks for your reply. I kind of figured it out.
From NUC's manual:
5.1.1.1 Front Panel Header (2.0 mm Pitch)
This section describes the functions of the front panel header. Table 14 lists the signal
names of the front panel header. Front Panel Header (2.0 mm Pitch) is a connection
diagram for the front panel header.
Table 14. Front Panel Header (2.0 mm Pitch)
Pin Signal Name Description Pin Signal Name Description
1 HDD_POWER_LED Pull-up 750Ω to +5V 2 POWER_LED_MAIN [Out] Front panel LED (main color) Pull-up 300Ω to +5V
3 HDD_LED# [Out] HDD activity LED 4 POWER_LED_ALT [Out] Front panel LED (alt color)
5 GROUND Ground 6 POWER_SWITCH# [In] Power switch
7 RESET_SWITCH# [In] Reset switch 8 GROUND Ground
9 +5V_DC (1A) (Vcc) Power 10 Key No pin
As fas as I understand it, I must find some connector cables from 2,54 mm female to 2.0 mm female. I'll give it a try.
👌 If you have any problems, please contact our discord chat, it will be faster.