[General Issue]: Connected Clients List Remote IP is (none) and no byte transferring
sumantain opened this issue · 2 comments
sumantain commented
In raising this issue I confirm that
- I have read the documentation
- I have read and understood the PiVPN General Guidelines
- I have read and understood the PiVPN Troubleshooting Guidelines
- The issue I am reporting isn't a duplicate, see closed issues and open issues.
- I have searched for similar issues and solutions
- I can replicate the issue even after a clean OS installation
Describe the issue
After installation and setup, the connection find no data is transferring through VPN
pi@bapipi:~ $ pivpn -d
::: Generating Debug Output
:::: PiVPN debug ::::
=============================================
:::: Latest commit ::::
Branch: master
Commit: 4032a55c80f25b51419180eda93f44d579ab79e9
Author: 4s3ti
Date: Wed Mar 29 14:54:19 2023 +0200
Summary: docs(issues): Remove old markdown template
=============================================
:::: Installation settings ::::
PLAT=Raspbian
OSCN=bullseye
USING_UFW=0
pivpnforceipv6route=1
IPv4dev=eth0
dhcpReserv=1
IPv4addr=192.168.0.102/24
IPv4gw=192.168.0.1
install_user=pi
install_home=/home/pi
VPN=wireguard
pivpnPORT=51820
pivpnDNS1=9.9.9.9
pivpnDNS2=149.112.112.112
pivpnHOST=REDACTED
INPUT_CHAIN_EDITED=0
FORWARD_CHAIN_EDITED=0
INPUT_CHAIN_EDITEDv6=
FORWARD_CHAIN_EDITEDv6=
pivpnPROTO=udp
pivpnMTU=1420
pivpnDEV=wg0
pivpnNET=10.180.251.0
subnetClass=24
pivpnenableipv6=0
ALLOWED_IPS="0.0.0.0/0, ::0/0"
UNATTUPG=1
INSTALLED_PACKAGES=(git dnsutils grepcidr bsdmainutils iptables-persistent wireguard-tools qrencode unattended-upgrades)
=============================================
:::: Server configuration shown below ::::
[Interface]
PrivateKey = server_priv
Address = 10.180.251.1/24
MTU = 1420
ListenPort = 51820
### begin SBGTech ###
[Peer]
PublicKey = SBGTech_pub
PresharedKey = SBGTech_psk
AllowedIPs = 10.180.251.2/32
### end SBGTech ###
=============================================
:::: Client configuration shown below ::::
[Interface]
PrivateKey = SBGTech_priv
Address = 10.180.251.2/24
DNS = 9.9.9.9, 149.112.112.112
[Peer]
PublicKey = server_pub
PresharedKey = SBGTech_psk
Endpoint = REDACTED:51820
AllowedIPs = 0.0.0.0/0, ::0/0
=============================================
:::: Recursive list of files in ::::
:::: /etc/wireguard shown below ::::
/etc/wireguard:
configs
keys
wg0.conf
/etc/wireguard/configs:
clients.txt
SBGTech.conf
/etc/wireguard/keys:
SBGTech_priv
SBGTech_psk
SBGTech_pub
server_priv
server_pub
=============================================
:::: Self check ::::
:: [OK] IP forwarding is enabled
:: [OK] Iptables MASQUERADE rule set
:: [OK] WireGuard is running
:: [OK] WireGuard is enabled
(it will automatically start on reboot)
:: [OK] WireGuard is listening on port 51820/udp
=============================================
:::: Having trouble connecting? Take a look at the FAQ:
:::: https://docs.pivpn.io/faq
=============================================
:::: WARNING: This script should have automatically masked sensitive ::::
:::: information, however, still make sure that PrivateKey, PublicKey ::::
:::: and PresharedKey are masked before reporting an issue. An example key ::::
:::: that you should NOT see in this log looks like this: ::::
:::: YIAoJVsdIeyvXfGGDDadHh6AxsMRymZTnnzZoAb9cxRe ::::
=============================================
:::: Debug complete ::::
:::
::: Debug output completed above.
::: Copy saved to /tmp/debug.log
:::
and in Connected Clients, List is showing Remote IP (none) and no data transferring
pi@bapipi:~ $ pivpn -c
::: Connected Clients List :::
Name Remote IP Virtual IP Bytes Received Bytes Sent Last Seen
SBGTech (none) 10.180.251.2 0B 0B (not yet)
::: Disabled clients :::
Expected behavior
In Connected Clients, Remote IP should be available and data transfer must work as expected.
Please describe the steps to replicate the issue
- Install pivpn
- add client
- connect with QR
Have you taken any steps towards solving your issue?
Try to understand but not able to identify
Screenshots
No response
Where did you run pivpn?
RaspberryPi
Please provide your output from uname -a
pi@bapipi:~ $ uname -a
Linux bapipi 6.1.21-v8+ #1642 SMP PREEMPT Mon Apr 3 17:24:16 BST 2023 aarch64 GNU/Linux
Details about Operative System
pi@bapipi:~ $ cat /etc/os-release
PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)"
NAME="Raspbian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"
Installation
No response
Profile / Client creation
No response
Debug output
pi@bapipi:~ $ pivpn debug
::: Generating Debug Output
:::: PiVPN debug ::::
=============================================
:::: Latest commit ::::
Branch: master
Commit: 4032a55c80f25b51419180eda93f44d579ab79e9
Author: 4s3ti
Date: Wed Mar 29 14:54:19 2023 +0200
Summary: docs(issues): Remove old markdown template
=============================================
:::: Installation settings ::::
PLAT=Raspbian
OSCN=bullseye
USING_UFW=0
pivpnforceipv6route=1
IPv4dev=eth0
dhcpReserv=1
IPv4addr=192.168.0.102/24
IPv4gw=192.168.0.1
install_user=pi
install_home=/home/pi
VPN=wireguard
pivpnPORT=51820
pivpnDNS1=9.9.9.9
pivpnDNS2=149.112.112.112
pivpnHOST=REDACTED
INPUT_CHAIN_EDITED=0
FORWARD_CHAIN_EDITED=0
INPUT_CHAIN_EDITEDv6=
FORWARD_CHAIN_EDITEDv6=
pivpnPROTO=udp
pivpnMTU=1420
pivpnDEV=wg0
pivpnNET=10.180.251.0
subnetClass=24
pivpnenableipv6=0
ALLOWED_IPS="0.0.0.0/0, ::0/0"
UNATTUPG=1
INSTALLED_PACKAGES=(git dnsutils grepcidr bsdmainutils iptables-persistent wireguard-tools qrencode unattended-upgrades)
=============================================
:::: Server configuration shown below ::::
[Interface]
PrivateKey = server_priv
Address = 10.180.251.1/24
MTU = 1420
ListenPort = 51820
### begin SBGTech ###
[Peer]
PublicKey = SBGTech_pub
PresharedKey = SBGTech_psk
AllowedIPs = 10.180.251.2/32
### end SBGTech ###
=============================================
:::: Client configuration shown below ::::
[Interface]
PrivateKey = SBGTech_priv
Address = 10.180.251.2/24
DNS = 9.9.9.9, 149.112.112.112
[Peer]
PublicKey = server_pub
PresharedKey = SBGTech_psk
Endpoint = REDACTED:51820
AllowedIPs = 0.0.0.0/0, ::0/0
=============================================
:::: Recursive list of files in ::::
:::: /etc/wireguard shown below ::::
/etc/wireguard:
configs
keys
wg0.conf
/etc/wireguard/configs:
clients.txt
SBGTech.conf
/etc/wireguard/keys:
SBGTech_priv
SBGTech_psk
SBGTech_pub
server_priv
server_pub
=============================================
:::: Self check ::::
:: [OK] IP forwarding is enabled
:: [OK] Iptables MASQUERADE rule set
:: [OK] WireGuard is running
:: [OK] WireGuard is enabled
(it will automatically start on reboot)
:: [OK] WireGuard is listening on port 51820/udp
=============================================
:::: Having trouble connecting? Take a look at the FAQ:
:::: https://docs.pivpn.io/faq
=============================================
:::: WARNING: This script should have automatically masked sensitive ::::
:::: information, however, still make sure that PrivateKey, PublicKey ::::
:::: and PresharedKey are masked before reporting an issue. An example key ::::
:::: that you should NOT see in this log looks like this: ::::
:::: YIAoJVsdIeyvXfGGDDadHh6AxsMRymZTnnzZoAb9cxRe ::::
=============================================
:::: Debug complete ::::
:::
::: Debug output completed above.
::: Copy saved to /tmp/debug.log
:::
Mobile Log:
wireguard-log.txt
orazioedoardo commented
Sorry for the delay, it looks like you can't connect to the server, try the troubleshooting steps at docs.pivpn.io