Gui is kind of broke

Question

Gui is kind of broke

Closed this issue 3 years ago · 4 comments

razzor1984 commented 3 years ago

Hello,

after starting the gui via comand prompt - gk6x.exe /gui

i cant edit under Primary my sk21 keyboard:

I cant klick on the configuration Buttons or anything there i only getting the stop sign.

Os information window 10 - 21h2
Tested Browser:Version 95.0.4638.54 (Official Build) (64-bit)
Edge: Current stabel build
FF:95.0.1 (64-Bit)

Best Regards Razzor

Answer 1 · 2021-12-17T12:10:29.000Z

You need to resize your browser. The original software was built on a fixed size / aspect ratio. The buttons on your screenshot are being blocked off due to being pushed under the keyboard buttons (which are blocked off on the base layer). Resizing should fix it.

See #65 #144 #165

Answer 2 · 2021-12-18T07:54:08.000Z

Thanks, it fixed it, I have an additional question, how can I store the lightning settings permanent. After applying the RGB it only shows it for a short period of time. After that I must start the Program again and load the RGB on the device.

Answer 3 · 2021-12-18T11:40:16.000Z

Lighting should be permanent. You should have a lighting key combo on your keyboard that lets you cycle through your assigned lighting settings. Some keyboard are slightly different though.

Some things with the GUI are kinda weird where you need to "apply" and "save" things, which is why it might be temporary if you aren't doing both.

Answer 4 · 2021-12-18T19:12:33.000Z

Thanks that’s what i needed, i googled it and for the Epomaker sk21 its FN + 1 that’s the mode which is the static lightmode.