Printing of incomplete .gcode
Opened this issue · 1 comments
ingbrzy commented
Gcode uploaded to Connect Files has 390MB
If during transfer of .gcode to Printer Wi-Fi connection is lost, printer is still starting to print model and print incomplete model...
.gcode on the printer has 121MB (from 390MB)
Job after printing of incomplete .gcode is marked as DONE, but heating of bed+extruder is not stopped..
Is it possible for printer to detect incomplete .gcode before start?
Thank you
ingbrzy commented
Maybe printer could check if this line exists in the .gcode before start..
prusaslicer_config = end