Siren not exposed

Question

Siren not exposed

Closed this issue 2 years ago · 10 comments

My siren is not exposed, is there any way to fix that, got the siren with the temp sensor in it and i can see the temp but not activate the siren nor the alarm

Answer 1 · 2022-10-25T15:27:00.000Z

Hi & thanks for reaching out. So the siren temperature sensor is exposed and showing up in your Home app?

Security alarm system is exposed once you put the alarm code in your config. Have you done so?

I do not believe there is a way to activate the siren itself via the API or official Verisure app.

Answer 2 · 2022-10-25T16:16:41.000Z

Yes, i have the 4 digit code and the token in my config i have two sirens, one in the garage and one in the house but i cant see anyone of them.

As you can see in the attached picture, under garage its only temp, and the temp sensor is in the siren

Answer 3 · 2022-10-25T20:47:24.000Z

Okej, so you are missing one temperature sensor accessory and the alarm accessory from the list?

What does the two sirens look like?

Answer 4 · 2022-10-26T03:39:32.000Z

I have this one in my garage

And this in the house

Answer 5 · 2022-10-26T06:19:42.000Z

The one in your garage does not have a temperature sensor.

Please check the startup logs to see if the security alarm accessory is created.

Answer 6 · 2022-10-26T06:23:26.000Z

it says indoor siren with heat detection

Answer 7 · 2022-10-26T06:32:42.000Z

By bad, I was mistaken about it not having a temp sensor.

”Röstenhet” is not showing up? Please check the logs.

Answer 8 · 2022-10-30T13:35:10.000Z

Any update?

Answer 9 · 2022-10-30T14:15:38.000Z

Dont know if this helps? Still only have the tempsensors

Answer 10 · 2022-10-30T15:32:33.000Z

Ok, so Homebridge is successfully initiating the two temperature sensors?

Does the log output include "Alarm .."?