Failed to install in github codespace
Opened this issue · 2 comments
tyeth commented
Hey, the docs offer install strings for most platforms, but that fails in github codespace https://github.com/tyeth/boxes
After a bit chatting with bard and trying alternatives (apt [libcairo2-dev not found] pip3 --force upgrade etc), it eventually suggested conda, which appeared to work flawlessly.
Suggestion to add conda install pycairo to list of alternative package manager install commands.
tyeth commented
Tell a lie, still doesn't work. Curious, here's the log output: [I'd installed pycairo via conda at this point, but not activated env until second log]
Original pip install Details
(base) @tyeth ➜ /workspaces/boxes (snapmaker2-A350-airpurifier) $ pip3 install -r requirements_dev.txt
Collecting inkex (from -r requirements_dev.txt (line 1))
Using cached inkex-1.3.0-py3-none-any.whl.metadata (3.0 kB)
Collecting mypy (from -r requirements_dev.txt (line 2))
Downloading mypy-1.8.0-cp311-cp311-manylinux_2_17_x86_64.manylinux2014_x86_64.whl.metadata (1.8 kB)
Collecting pre-commit (from -r requirements_dev.txt (line 3))
Using cached pre_commit-3.6.0-py2.py3-none-any.whl.metadata (1.3 kB)
Collecting types-Markdown (from -r requirements_dev.txt (line 4))
Using cached types_Markdown-3.5.0.20240129-py3-none-any.whl.metadata (1.8 kB)
Collecting Pillow>=7.0.0 (from inkex->-r requirements_dev.txt (line 1))
Downloading pillow-10.2.0-cp311-cp311-manylinux_2_28_x86_64.whl.metadata (9.7 kB)
Collecting PyGObject>=3.36 (from inkex->-r requirements_dev.txt (line 1))
Using cached PyGObject-3.46.0.tar.gz (723 kB)
Installing build dependencies ... error
error: subprocess-exited-with-error
× pip subprocess to install build dependencies did not run successfully.
│ exit code: 1
╰─> [48 lines of output]
Collecting setuptools
Using cached setuptools-69.0.3-py3-none-any.whl.metadata (6.3 kB)
Collecting wheel
Using cached wheel-0.42.0-py3-none-any.whl.metadata (2.2 kB)
Collecting pycairo
Using cached pycairo-1.25.1.tar.gz (347 kB)
Installing build dependencies: started
Installing build dependencies: finished with status 'done'
Getting requirements to build wheel: started
Getting requirements to build wheel: finished with status 'done'
Installing backend dependencies: started
Installing backend dependencies: finished with status 'done'
Preparing metadata (pyproject.toml): started
Preparing metadata (pyproject.toml): finished with status 'done'
Using cached setuptools-69.0.3-py3-none-any.whl (819 kB)
Using cached wheel-0.42.0-py3-none-any.whl (65 kB)
Building wheels for collected packages: pycairo
Building wheel for pycairo (pyproject.toml): started
Building wheel for pycairo (pyproject.toml): finished with status 'error'
error: subprocess-exited-with-error
× Building wheel for pycairo (pyproject.toml) did not run successfully.
│ exit code: 1
╰─> [15 lines of output]
running bdist_wheel
running build
running build_py
creating build
creating build/lib.linux-x86_64-cpython-311
creating build/lib.linux-x86_64-cpython-311/cairo
copying cairo/__init__.py -> build/lib.linux-x86_64-cpython-311/cairo
copying cairo/__init__.pyi -> build/lib.linux-x86_64-cpython-311/cairo
copying cairo/py.typed -> build/lib.linux-x86_64-cpython-311/cairo
running build_ext
Package cairo was not found in the pkg-config search path.
Perhaps you should add the directory containing `cairo.pc'
to the PKG_CONFIG_PATH environment variable
No package 'cairo' found
Command '['pkg-config', '--print-errors', '--exists', 'cairo >= 1.15.10']' returned non-zero exit status 1.
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
ERROR: Failed building wheel for pycairo
Failed to build pycairo
ERROR: Could not build wheels for pycairo, which is required to install pyproject.toml-based projects
[notice] A new release of pip is available: 23.3.2 -> 24.0
[notice] To update, run: pip install --upgrade pip
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: subprocess-exited-with-error
× pip subprocess to install build dependencies did not run successfully.
│ exit code: 1
╰─> See above for output.
note: This error originates from a subprocess, and is likely not a problem with pip.
[notice] A new release of pip is available: 23.3.2 -> 24.0
[notice] To update, run: pip install --upgrade pip
conda environment pip output
Collecting PyGObject>=3.36 (from inkex->-r requirements_dev.txt (line 1))
Using cached PyGObject-3.46.0.tar.gz (723 kB)
Installing build dependencies ... error
error: subprocess-exited-with-error
× pip subprocess to install build dependencies did not run successfully.
│ exit code: 1
╰─> [48 lines of output]
Collecting setuptools
Using cached setuptools-69.0.3-py3-none-any.whl.metadata (6.3 kB)
Collecting wheel
Using cached wheel-0.42.0-py3-none-any.whl.metadata (2.2 kB)
Collecting pycairo
Using cached pycairo-1.25.1.tar.gz (347 kB)
Installing build dependencies: started
Installing build dependencies: finished with status 'done'
Getting requirements to build wheel: started
Getting requirements to build wheel: finished with status 'done'
Installing backend dependencies: started
Installing backend dependencies: finished with status 'done'
Preparing metadata (pyproject.toml): started
Preparing metadata (pyproject.toml): finished with status 'done'
Using cached setuptools-69.0.3-py3-none-any.whl (819 kB)
Using cached wheel-0.42.0-py3-none-any.whl (65 kB)
Building wheels for collected packages: pycairo
Building wheel for pycairo (pyproject.toml): started
Building wheel for pycairo (pyproject.toml): finished with status 'error'
error: subprocess-exited-with-error
× Building wheel for pycairo (pyproject.toml) did not run successfully.
│ exit code: 1
╰─> [15 lines of output]
running bdist_wheel
running build
running build_py
creating build
creating build/lib.linux-x86_64-cpython-311
creating build/lib.linux-x86_64-cpython-311/cairo
copying cairo/__init__.py -> build/lib.linux-x86_64-cpython-311/cairo
copying cairo/__init__.pyi -> build/lib.linux-x86_64-cpython-311/cairo
copying cairo/py.typed -> build/lib.linux-x86_64-cpython-311/cairo
running build_ext
Package xau was not found in the pkg-config search path.
Perhaps you should add the directory containing `xau.pc'
to the PKG_CONFIG_PATH environment variable
Package 'xau', required by 'xcb', not found
Command '['pkg-config', '--print-errors', '--exists', 'cairo >= 1.15.10']' returned non-zero exit status 1.
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
ERROR: Failed building wheel for pycairo
Failed to build pycairo
ERROR: Could not build wheels for pycairo, which is required to install pyproject.toml-based projects
[notice] A new release of pip is available: 23.3.2 -> 24.0
[notice] To update, run: pip install --upgrade pip
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: subprocess-exited-with-error
× pip subprocess to install build dependencies did not run successfully.
│ exit code: 1
╰─> See above for output.
PKG_CONFIG_PATH is empty, so it defaults to /usr/share/pkgconfig which has some .pc files but not pycairo
lazka commented
All error messages suggest you are missing cairo.
See https://pycairo.readthedocs.io/en/latest/getting_started.html#getting-started for how to install it.
I don't know how to do that best with codespaces as I don't have much experience with it.