/wg-easy

The easiest way to run WireGuard VPN + Web-based Admin UI.

Primary LanguageHTMLOtherNOASSERTION

WireGuard Easy

Build & Publish Docker Image to Docker Hub Lint Docker Docker Sponsor GitHub Stars

You have found the easiest way to install & manage WireGuard on any Linux host!

Features

  • All-in-one: WireGuard + Web UI.
  • Easy installation, simple to use.
  • List, create, edit, delete, enable & disable clients.
  • Show a client's QR code.
  • Download a client's configuration file.
  • Statistics for which clients are connected.
  • Tx/Rx charts for each connected client.
  • Gravatar support.

Requirements

  • A host with a kernel that supports WireGuard (all modern kernels).
  • A host with Docker installed.

Installation

1. Install Docker

If you haven't installed Docker yet, install it by running:

$ curl -sSL https://get.docker.com | sh
$ sudo usermod -aG docker $(whoami)
$ exit

And log in again.

2. Run WireGuard Easy

To automatically install & run wg-easy, simply run:

$ docker run -d --name=wg-easy -e WG_HOST=188...... -e PASSWORD=..... -v ~/.wg-easy:/etc/wireguard -p 51820:51820/udp -p 51821:51821/tcp --cap-add=NET_ADMIN --cap-add=SYS_MODULE --sysctl="net.ipv4.conf.all.src_valid_mark=1" --sysctl="net.ipv4.ip_forward=1" --restart unless-stopped weejewel/wg-easy

💡 Replace YOUR_SERVER_IP with your WAN IP, or a Dynamic DNS hostname.

💡 Replace YOUR_ADMIN_PASSWORD with a password to log in on the Web UI.

The Web UI will now be available on http://0.0.0.0:51821.

💡 Your configuration files will be saved in ~/.wg-easy

3. Sponsor

Are you enjoying this project? Buy me a beer! 🍻

Options

These options can be configured by setting environment variables using -e KEY="VALUE" in the docker run command.

Env Default Example Description
PASSWORD - foobar123 When set, requires a password when logging in to the Web UI.
WG_HOST - vpn.myserver.com The public hostname of your VPN server.
WG_DEVICE eth0 ens6f0 Ethernet device the wireguard traffic should be forwarded through.
WG_PORT 51820 12345 The public UDP port of your VPN server. WireGuard will always listen on 51820 inside the Docker container.
WG_MTU null 1420 The MTU the clients will use. Server uses default WG MTU.
WG_PERSISTENT_KEEPALIVE 0 25 Value in seconds to keep the "connection" open. If this value is 0, then connections won't be kept alive.
WG_DEFAULT_ADDRESS 10.8.0.x 10.6.0.x Clients IP address range.
WG_DEFAULT_DNS 1.1.1.1 8.8.8.8, 8.8.4.4 DNS server clients will use.
WG_ALLOWED_IPS 0.0.0.0/0, ::/0 192.168.15.0/24, 10.0.1.0/24 Allowed IPs clients will use.
WG_PRE_UP ... - See config.js for the default value.
WG_POST_UP ... iptables ... See config.js for the default value.
WG_PRE_DOWN ... - See config.js for the default value.
WG_POST_DOWN ... iptables ... See config.js for the default value.

If you change WG_PORT, make sure to also change the exposed port.

Updating

To update to the latest version, simply run:

docker stop wg-easy
docker rm wg-easy
docker pull weejewel/wg-easy

And then run the docker run -d \ ... command above again.

Common Use Cases