firmware: reboot if configuration request a not supported sensor
pat1 opened this issue · 0 comments
pat1 commented
#1970-00-00T00:00:00 F: Logging started
#2022-06-09T08:18:29 N: Current RTC date and time: 9/6/2022 8:18:29
#2022-06-09T08:18:29 N: Configuration received... [ OK ]
#2022-06-09T08:18:29 N: Load configuration... [ OK ]
#2022-06-09T08:18:29 N: --> type: report-gsm
#2022-06-09T08:18:29 N: --> version: 3.8
#2022-06-09T08:18:29 N: --> configuration version: 3.2
#2022-06-09T08:18:29 N: --> sensors: 13
#2022-06-09T08:18:29 N: --> ConstantData: 2
#2022-06-09T08:18:29 N: --> CD 0: B01019 : Malborghetto di Boara
#2022-06-09T08:18:29 N: --> CD 1: B07030 : 20
#2022-06-09T08:18:29 N: --> gsm apn: ibox.tim.it
#2022-06-09T08:18:29 N: --> gsm username:
#2022-06-09T08:18:29 N: --> gsm password:
#2022-06-09T08:18:29 N: --> ntp server: it.pool.ntp.org
#2022-06-09T08:18:29 N: --> mqtt server: rmap.arpae.it
#2022-06-09T08:18:29 N: --> mqtt port: 1883
#2022-06-09T08:18:29 N: --> mqtt root topic: 1/report/digiteco//1165625,4485892/cluster/
#2022-06-09T08:18:29 N: --> mqtt maint topic: 1/maint/digiteco//1165625,4485892/cluster/
#2022-06-09T08:18:29 N: --> mqtt rpc topic: 1/rpc/digiteco//1165625,4485892/cluster/
#2022-06-09T08:18:29 N: --> mqtt username: digiteco
#2022-06-09T08:18:29 N: --> mqtt password: MYzmeRKckZ
#2022-06-09T08:18:29 N: --> station slug: malborghetto
#2022-06-09T08:18:29 N: --> board slug: stima3
#2022-06-09T08:18:39 N: --> 1: I2C-ITH [ 0x23 ]: 254,0,0/103,2000,-,-/ [ OK ]
#2022-06-09T08:18:39 N: --> 2: I2C-NTH [ 0x23 ]: 3,0,180/103,2000,-,-/ [ OK ]
#2022-06-09T08:18:39 N: --> 3: I2C-MTH [ 0x23 ]: 0,0,180/103,2000,-,-/ [ OK ]
#2022-06-09T08:18:39 N: --> 4: I2C-XTH [ 0x23 ]: 2,0,180/103,2000,-,-/ [ OK ]
#2022-06-09T08:18:39 N: --> 5: I2C-TBR [ 0x21 ]: 1,0,180/1,-,-,-/ [ OK ]
#2022-06-09T08:18:39 N: --> 6: I2C-DEP [ 0x30 ]: 254,0,0/265,1,-,-/ [ OK ]
#2022-06-09T08:18:40 N: --> 7: I2C-DWA [ 0x45 ]: 254,0,0/103,10000,-,-/ [ FAIL ]
#2022-06-09T08:18:40 N: --> 8: I2C-DWB [ 0x45 ]: 200,0,180/103,10000,-,-/ [ FAIL ]
#2022-06-09T08:18:40 N: --> 9: I2C-DWC [ 0x45 ]: 2,0,180/103,10000,-,-/ [ OK ]
#2022-06-09T08:18:40 N: --> 10: I2C-DWD [ 0x45 ]: 0,0,180/103,10000,-,-/ [ OK ]
#2022-06-09T08:18:40 N: --> 11: I2C-DWE [ 0x45 ]: 9,0,180/103,10000,-,-/ [ OK ]
#2022-06-09T08:18:40 N: --> 12: I2C-DWF [ 0x45 ]: 205,0,180/103,10000,-,-/ [ OK ]
#2022-06-09T08:18:40 E: SensorDriver I2C-DSA create... [ FAIL ]--> driver or type not found.
#2022-06-09T08:18:40 N: --> 12: I2C-DSA [ 0x47 ]: 0,0,180/1,-,-,-/ [ OK ]
#2022-06-09T08:18:53 N: SIM800 switching ON... [ OK ] [ ON ]
#2022-06-09T08:18:56 N: SIM800 reset to factory default [ OK ]
#2022-06-09T08:19:01 N: SIM800 echo mode off [ OK ]
#2022-06-09T08:19:04 N: SIM800 signal [ OK ] [ rssi 12, ber 0 ]
#2022-06-09T08:19:05 N: SIM800 network registered... [ OK ]
#2022-06-09T08:19:05 N: SIM800 setup... [ OK ]
#2022-06-09T08:19:05 N: SIM800 GPRS attach... [ OK ] [ NO ]
#2022-06-09T08:19:11 N: SIM800 attach GPRS... [ OK ]
#2022-06-09T08:19:11 N: SIM800 single IP mode... [ OK ]
#2022-06-09T08:19:11 N: SIM800 switch to data mode... [ OK ]
#2022-06-09T08:19:11 N: SIM800 transparent mode... [ OK ]
#2022-06-09T08:19:12 N: SIM800 set APN, username and password... [ OK ]
#2022-06-09T08:19:12 N: SIM800 setting up connection... [ OK ]
#2022-06-09T08:19:15 N: SIM800 IP... [ OK ] [ 10.72.23.74 ]
#2022-06-09T08:19:15 N: SIM800 start connection... [ OK ]
#2022-06-09T08:19:19 N: SIM800 UDP status... [ OK ] [ CONNECT ]
#2022-06-09T08:19:19 N: NTP send request success
#2022-06-09T08:19:19 N: NTP response... [ OK ] diff time: 0ms
#2022-06-09T08:19:19 N: RTC set... [ OK ]
#2022-06-09T08:19:19 N: Current System date and time: 9/6/2022 8:19:19
#2022-06-09T08:19:19 N: Current date and time is: 9/6/2022 8:19:19
#2022-06-09T08:19:19 N: Acquisition scheduling...
#2022-06-09T08:19:19 N: --> report every 3 minutes
#2022-06-09T08:19:19 N: --> starting at: 8:21:0
#2022-06-09T08:19:19 N: --> testing at: 8:20:0
#2022-06-09T08:19:19 N: SDCARD opened Test SDcard
#2022-06-09T08:19:23 N: SIM800 stop connection... [ OK ]
#2022-06-09T08:19:24 N: SIM800 PDP close... [ OK ]
#2022-06-09T08:19:24 N: SIM800 detach GPRS... [ OK ]
#2022-06-09T08:19:24 N: SIM800 stop connection... [ OK ]
#2022-06-09T08:19:28 N: SIM800 switching OFF... [ OK ] [ OFF ]
#2022-06-09T08:20:00 N: Sensors reading...
#1970-00-00T00:00:00 F: Logging started
#2022-06-09T08:20:09 N: Current RTC date and time: 9/6/2022 8:20:9
#2022-06-09T08:20:09 N: Configuration received... [ OK ]
#2022-06-09T08:20:09 N: Load configuration... [ OK ]
#2022-06-09T08:20:09 N: --> type: report-gsm
#2022-06-09T08:20:09 N: --> version: 3.8
#2022-06-09T08:20:09 N: --> configuration version: 3.2
#2022-06-09T08:20:09 N: --> sensors: 13
#2022-06-09T08:20:09 N: --> ConstantData: 2
#2022-06-09T08:20:09 N: --> CD 0: B01019 : Malborghetto di Boara
#2022-06-09T08:20:09 N: --> CD 1: B07030 : 20
#2022-06-09T08:20:09 N: --> gsm apn: ibox.tim.it
#2022-06-09T08:20:09 N: --> gsm username:
#2022-06-09T08:20:09 N: --> gsm password:
#2022-06-09T08:20:09 N: --> ntp server: it.pool.ntp.org
#2022-06-09T08:20:09 N: --> mqtt server: rmap.arpae.it
#2022-06-09T08:20:09 N: --> mqtt port: 1883
#2022-06-09T08:20:09 N: --> mqtt root topic: 1/report/digiteco//1165625,4485892/cluster/
#2022-06-09T08:20:09 N: --> mqtt maint topic: 1/maint/digiteco//1165625,4485892/cluster/
#2022-06-09T08:20:09 N: --> mqtt rpc topic: 1/rpc/digiteco//1165625,4485892/cluster/
#2022-06-09T08:20:09 N: --> mqtt username: digiteco
#2022-06-09T08:20:09 N: --> mqtt password: MYzmeRKckZ
#2022-06-09T08:20:09 N: --> station slug: malborghetto
#2022-06-09T08:20:09 N: --> board slug: stima3