Tuner changes units
Closed this issue · 1 comments
Swontu commented
When using the tuner and a parameter in the Meg-range, the tuner switches to milli-units. See schematic:
tune.zip
To reproduce:
- Simulate directly and observe the output voltage in the table (0.9 V)
- Click the tuner and then parameter R
- Pull the slider, press close and choose "no" (don't update)
- Observe the voltage again (now 9e-9 V) and the parameter (now R=9M instead of R=9e6)
Windows 11
Qucs-S 24.4.0