rainmeter/rainmeter-docs

Small change to HWINFO site

CrazyWolf13 opened this issue · 5 comments

https://docs.rainmeter.net/tips/hwinfo/
Here on the first image, Show sensors on startup should be ticked, otherwise it won't work.
Thank you Jeff and Reisir for the help.

I'm not sure I follow. It works fine for me without having that checked.
1

I'm not sure I follow. It works fine for me without having that checked.
1

On my end it was required, otherwise i had to manually open the sensors tab once by right clicking the tray icon, on startup. The Reisir and Jeff told me to check this and i should make an issue request here...

If the intent is to have the sensors dialog open on startup, then yes. You would want to check that "Show Sensors on Startup" box. However, I personally can't see why you would want that, and I certainly don't want to change the docs to recommend it.

If the intent is to have the sensors dialog open on startup, then yes. You would want to check that "Show Sensors on Startup" box. However, I personally can't see why you would want that, and I certainly don't want to change the docs to recommend it.

No, the sensors didn't start up for me on startup, i did everything like in the guide then i asked in the rainmeter dc and Reisir and Jeff, they told me to enabled this, and after this it worked on startup. They also told me i should report it here so it can be updated, cause it's an error.
I don't know what is correct here, they just told me so, and after i did the change it worked for me so i assume it has to correct to change the guide.

If the intent is to have the sensors dialog open on startup, then yes. You would want to check that "Show Sensors on Startup" box. However, I personally can't see why you would want that, and I certainly don't want to change the docs to recommend it.

You have the minimize sensors on startup ticked, so they surely won't display 😂