Support for Destination Address Digipeating
DayleDrinkwater opened this issue · 1 comments
DayleDrinkwater commented
Hello, the T-Echo firmware by cfr34k (https://github.com/cfr34k/t-echo-lora-aprs) encodes the digi path via the destination field.
For example APLETK-1
should translate to digipeating the same as WIDE1-1
, as specified in http://www.aprs.org/doc/APRS101.PDF , page 15, "Generic APRS Digipeater Path"
However this is not followed in this firmware. Please can support be added to allow this type of digipeating.
Using this format decreases the length of the packet and will help with decoding errors and congestion.
Thanks,
Dayle M0OUE
wb2osz commented
This feature is generally considered to be obsolete.
Discussion here: https://groups.io/g/APRS/topic/106911039#msg2836
73,
John WB2OSZ