riejohnson/ConText

make not working

Closed this issue · 3 comments

hwsamuel commented

I have an NVIDIA GeForce 940MX GPU on my machine and also have gcc fully functional, as well as CUDA 9.1 installed. I've followed the README instructions and added the custom CUDA path to the makefile but I'm getting the following error on running make

/bin/rm -f bin/reNet
/usr/local/cuda-9.1  /bin/nvcc src/com/AzDmat.cpp src/com/AzParam.cpp src/com/AzSmat.cpp src/com/AzStrPool.cpp src/com/AzTextMat.cpp src/com/AzTools.cpp src/com/AzUtil.cpp src/nnet/AzpPatchDflt.cpp src/nnet/AzpReNet.cpp src/nnet/AzpReLayer.cpp src/nnet/AzMultiConn.cpp src/nnet/AzpMain_reNet.cpp src/nnet/AzpLmSgd.cpp src/nnet/AzPmat.cpp src/nnet/AzPmatSpa.cpp src/nnet/AzPmatApp.cpp src/nnet/AzPmat_gpu.cu src/nnet/AzPmatSpa_gpu.cu src/nnet/AzCuda_Pmat.cu src/nnet/AzCuda_PmatSpa.cu src/nnet/AzCuda_PmatApp.cu src/nnet/AzpEv.cpp src/nnet/AzpLossDflt.cpp src/nnet/driv_reNet.cpp -Isrc/com -Isrc/data -Isrc/nnet  -D__AZ_SMAT_SINGLE__ -D__AZ_GPU__  -I/usr/local/cuda-9.1  /include -O2 -gencode arch=compute_20,code=sm_20 -gencode arch=compute_20,code=sm_21 -gencode arch=compute_30,code=sm_30 -gencode arch=compute_32,code=sm_32 -gencode arch=compute_35,code=sm_35 -gencode arch=compute_37,code=sm_37 -gencode arch=compute_50,code=sm_50 -gencode arch=compute_52,code=sm_52 -gencode arch=compute_53,code=sm_53 -o bin/reNet -L/usr/local/cuda-9.1  /lib64 -lcudart -lcublas -lcurand -lcusparse
make: execvp: /usr/local/cuda-9.1: Permission denied
makefile:84: recipe for target 'bin/reNet' failed
make: *** [bin/reNet] Error 127
hwsamuel commented

Resolved. I had an extra space after the CUDA_PATH, correct configuration is as follows for future reference

CUDA_PATH = /usr/local/cuda-9.1# <= Change this

  • 👍2
lenhhoxung86 commented

I have the same problem even I've changed the variable CUDA_PATH.

mkdir -p bin 
/bin/rm -f bin/reNet
"/usr/local/cuda-9.0/"  /bin/nvcc src/com/AzDmat.cpp src/com/AzParam.cpp src/com/AzSmat.cpp src/com/AzStrPool.cpp src/com/AzTextMat.cpp src/com/AzTools.cpp src/com/AzUtil.cpp src/nnet/AzpPatchDflt.cpp src/nnet/AzpReNet.cpp src/nnet/AzpReLayer.cpp src/nnet/AzMultiConn.cpp src/nnet/AzpMain_reNet.cpp src/nnet/AzpLmSgd.cpp src/nnet/AzPmat.cpp src/nnet/AzPmatSpa.cpp src/nnet/AzPmatApp.cpp src/nnet/AzPmat_gpu.cu src/nnet/AzPmatSpa_gpu.cu src/nnet/AzCuda_Pmat.cu src/nnet/AzCuda_PmatSpa.cu src/nnet/AzCuda_PmatApp.cu src/nnet/AzpEv.cpp src/nnet/AzpLossDflt.cpp src/nnet/driv_reNet.cpp -Isrc/com -Isrc/data -Isrc/nnet  -D__AZ_SMAT_SINGLE__ -D__AZ_GPU__  -I"/usr/local/cuda-9.0/"  /include -O2 -gencode arch=compute_20,code=sm_20 -gencode arch=compute_20,code=sm_21 -gencode arch=compute_30,code=sm_30 -gencode arch=compute_32,code=sm_32 -gencode arch=compute_35,code=sm_35 -gencode arch=compute_37,code=sm_37 -gencode arch=compute_50,code=sm_50 -gencode arch=compute_52,code=sm_52 -gencode arch=compute_53,code=sm_53 -o bin/reNet -L"/usr/local/cuda-9.0/"  /lib64 -lcudart -lcublas -lcurand -lcusparse
/bin/sh: 1: /usr/local/cuda-9.0/: Permission denied
makefile:99: recipe for target 'bin/reNet' failed
make: *** [bin/reNet] Error 126
lenhhoxung86 commented

Finally, here is the config that makes it run:

CUDA_PATH = /usr/local/cuda-9.0/# <= Change this 
#CUDA_PATH = /opt/sw/packages/cuda/7.5
CUDA_INC_PATH   = $(CUDA_PATH)/include
CUDA_BIN_PATH   = $(CUDA_PATH)/bin
CUDA_LIB_PATH   = $(CUDA_PATH)/lib64
LDFLAGS1   = -L$(CUDA_LIB_PATH) -lcudart -lcublas -lcurand -lcusparse
CFLAGS1 = -Isrc/com -Isrc/data -Isrc/nnet  -D__AZ_SMAT_SINGLE__ -D__AZ_GPU__  -I$(CUDA_INC_PATH) -O2 \
		-gencode arch=compute_30,code=sm_30 \
		-gencode arch=compute_32,code=sm_32 \
		-gencode arch=compute_35,code=sm_35 \
		-gencode arch=compute_37,code=sm_37 \
		-gencode arch=compute_50,code=sm_50 \
		-gencode arch=compute_52,code=sm_52 \
		-gencode arch=compute_53,code=sm_53
I had to remove lines with "arch=compute_20:
  • 👍2