riscv/riscv-debug-spec

Issues

• Suggested improvements in text of spec

  #1062 opened 3 months ago by rsnikhil
  5

• what is the behavior when tcontrol exists but mte/mpte behavior is not desired?

  #1069 opened 3 months ago by rtwfroody
  0

• Questions about DMI register op busy

  #1063 opened 3 months ago by zhangdujiao
  2

• how to modify code in debug mode in riscv

  #960 opened 10 months ago by deepakkapoor624
  4

• Can DMI BUS support 64bits access?

  #1060 opened 3 months ago by zhangdujiao
  1

• Question about Trigger Match Control Type6 CSR's "size" field function

  #1058 opened 4 months ago by micreven
  2

• Question about Trigger Match Control Type6 CSR's "match" field function

  #1057 opened 4 months ago by micreven
  2

• How to reset the DM on the first connection on both 0.13 and 1.0 spec versions

  #1021 opened 4 months ago by en-sc
  7

• Question about trigger exceptions and other types of exceptions occurring at the same time

  #1056 opened 4 months ago by Wei-VV1995
  8

• dcsr.cetrig should be WARL

  #1054 opened 5 months ago by Silabs-ArjanB
  1

• Clarify apparent inconsistency of debug version read by registers

  #1053 opened 5 months ago by psherman42
  0

• make list of implementation options

  #1052 opened 5 months ago by rtwfroody
  0

• Are the vs and vu bits in mcontrol6 dependent on misa.h?

  #1049 opened 5 months ago by ThimayaPR
  2

• Question about mcontrol6.match and tdata2

  #1050 opened 5 months ago by micreven
  4

• Stored value availability to TM in case of AMOs

  #1017 opened 5 months ago by en-sc
  6

• Missing state names

  #1047 opened 5 months ago by CLappin
  1

• Value of tinfo when selected trigger does not exist

  #1045 opened 6 months ago by jrahmeh
  2

• Cross Trigger definition in RISC-V

  #1025 opened 6 months ago by zhangdujiao
  3

• How to halt or resume multiple harts simultaneously?

  #1016 opened 6 months ago by zhangdujiao
  4

• Can tselect be written with an invalid index

  #1044 opened 6 months ago by jrahmeh
  2

• Multiple mcontrol6 triggers match on same instruction with different actions and timings

  #1043 opened 6 months ago by tomaird
  1

• `maskmax6` discovery may need clarification

  #1014 opened 6 months ago by en-sc
  2

• Minor typo + Cannot open PR

  #1041 opened 6 months ago by albert-azcarate
  2

• Ambiguous requirement about dmcontrol behavior when dmcontrol.dmactive==0

  #1029 opened 7 months ago by JanMatCodasip
  2

• Why debugger lose control of the hart while executing a program not terminate with an ebreak instruction

  #1028 opened 7 months ago by hikerxx
  0

• Trigger match on csrrs/csrrc to tdata1

  #1026 opened 7 months ago by tomaird
  13

• Hit bit interaction with action conflict when several triggers of the same priority match

  #1018 opened 7 months ago by en-sc
  3

• A typo in [5.4. Native Triggers]

  #1015 opened 7 months ago by en-sc
  1

• `mcontrol' / 'mcontrol6` `match=lt` trigger on the last valid address

  #1013 opened 7 months ago by en-sc
  6

• Timing requirements for a chain of `mcontrol` load address triggers

  #1011 opened 7 months ago by en-sc
  2

• Table cell justification/alignment issues

  #993 opened 7 months ago by TommyMurphyTM1234
  1

• NAPOT matching

  #999 opened 7 months ago by tomaird
  2

• Typo on the minimum requirements of Debug Mode

  #994 opened 7 months ago by albert-azcarate
  4

• Does *stateen0[57] control mscontext if implemented?

  #1008 opened 7 months ago by YenHaoChen
  2

• Typo/mistake in "Debug Mode" section/mprven

  #1000 opened 7 months ago by aap-sc
  1

• Clarification of register needed

  #1004 opened 7 months ago by CLappin
  1

• Q about Table 9 (action encoding)

  #995 opened 8 months ago by martinberger
  8

• Register bit-field bit offset numbers clipped

  #992 opened 8 months ago by TommyMurphyTM1234
  2

• Clarify effect of tdata1 write with zero when only one trigger type supported

  #991 opened 8 months ago by JamesKenneyImperas
  5

• Duplicate register field layout diagram for `tdata1`

  #989 opened 8 months ago by TommyMurphyTM1234
  1

• Priority of mcontrol/mcontrol6 load data before trigger

  #985 opened 8 months ago by en-sc
  1

• Discovery of incompatible base ISAs

  #975 opened 9 months ago by sorear
  13

• Does mcontrol6.hit affect future trigger firing

  #983 opened 9 months ago by tomaird
  1

• tmexttrigger clarification

  #980 opened 9 months ago by tomaird
  1

• misleading sbdata0 description

  #976 opened 9 months ago by bcstrongx
  1

• Minor asciidoc conversion problem

  #972 opened 9 months ago by pdonahue-ventana
  0

• Priority of various cmderrs

  #974 opened 9 months ago by pdonahue-ventana
  0

• "$" characters in asciidoc

  #964 opened 9 months ago by pdonahue-ventana
  3

• asciidoc lacks lists of figures and tables

  #966 opened 10 months ago by rtwfroody
  1

• clarifications on sdext and sdtrig extensions

  #967 opened 10 months ago by aap-sc
  1