Only get subscription response from Roomname/Aircon/#
Opened this issue · 13 comments
Thankyou for sharing this awesome writeup. I am using a RPI with openhab2 and mosquitto and can subscribe to Roomname/Aircon/# (giving me the response = "MHI2MQTT connected to MQTT broker at 192.168.1.148:1883" however any other subscriptions i enter return nothing eg. Roomname/Aircon/State
Roomname/Aircon/Fanspeed etc
this is the first time i have used mqtt so am i doing something wrong here or do i need to reflash the arduino pro ? appreciate any help with this.
The only thing you may want to add on your readme for future users is that they should not get the latest version of ArduinoJSON (6) as the INO file requires (5.x) and pops up with errors in the Arduino IDE for the latest version of this library. The only other thing was that on the ESP8266 webpage the maximum character length for the host name is (16 characters) i was trying to debug my code with an online hostname (m16.cloudmqtt.com) but would not fit in the field. That said i could never create the awesomeness that you have here!!
Hi Rob,
I have tried numerous times to reflash both the ESP with your exact settings and Arduino pro mini, I have an SRK variety split system (pretty much identical to your picture here). I can get the broker to connect to the default "Roomname/Aircon/#" and then all the subscribe items get listed however no status messages are ever sent to the broker. I am completely stumped as to what I am doing wrong.
Cheers
Glen
@gamblor999 did you ever figure this out? I'm trying to get this setup working on my MHI units and none of my commands are getting through to the Aircon unit. I can set debug mode on, and set the Setpoint etc, but there's no reaction from the unit and I never get any of the status topics sent back.
I did have trouble flashing the ESP8266 module with Arduino IDE. I ended up having to use the nodemcu-flasher instead, but don't know whether this might have screwed anything up.
@ThomasHFWright I got it working with the nodemcu finally thanks to help from absaloms github - details here
@ThomasHFWright I got it working with the nodemcu finally thanks to help from absaloms github - details here
Excellent! I'll give this a try in April when I'm back with my units
@ThomasHFWright I got it working with the nodemcu finally thanks to help from absaloms github - details here
@gamblor999 I'm not back with my units and eager to try and get this project finished :)
Did you end up using the same hardware as on this project? Or did you have to buy the hardware listed on MHI-AC-Ctrl?
I'm a novice at this and the other project seems quite advanced, requiring getting a PCB printed which I'm not even sure how to do! Plus a different version of the ESP8266, I have the ESP-01 ESP8266 WiFi Module from this project
@gamblor999 I am facing similar issues, I do receive feedback on the
roomname/aircon/service topic, I also receive feedback when sending commands to the Arduino Pro Mini hence the feedback has been generated by the ESP8266 (it's part of the script...).
So the problem has been linked to the Arduino Pro Mini, have you been able to fix the issue after all?
Same here.
Trying to get this working in 2024 and going by the MHI-AC-Ctrl post it seems the SRK20ZSA-W models (which is what I have) has a different signature that isn't recognised by this code.
Looking at line 27 of MHI-SPI2ESP.ino
const byte rx_frameSignature[3] = { 0x6C, 0x80, 0x04 };
It would seem 0x6C needs to be changed 0x6D (which in the posts above has been noted to be the signature of said model)
EDIT - Looks like this works now!
Trying to get this working in 2024 and going by the MHI-AC-Ctrl post it seems the SRK20ZSA-W models (which is what I have) has a different signature that isn't recognised by this code.
Looking at line 27 of MHI-SPI2ESP.ino
const byte rx_frameSignature[3] = { 0x6C, 0x80, 0x04 };
It would seem 0x6C needs to be changed 0x6D (which in the posts above has been noted to be the signature of said model)
EDIT - Looks like this works now!
Hi. I have the same ac and the same issue. Mqtt just doesn‘t show the values of the climate. I tried your method but it didn‘t worked. Do you have an idea why this isn‘t working?
Not sure - This worked for me across 4 units - Just make sure you are flashing properly and also make sure the connections are good between the ESP and the Arudino - I had some very weird issues and it came to a connection problem. This was after I got it working though.
As soon as the wifi is configured you should see the arduino login to the MQTT broker. It will have your name entry that you used in the configuration options, IP address, etc - You need to make sure this is correct first up. (Make sure IP, login details for MQTT are right in the config)
Settings - Addons - MQTT Broker - Logs
And in the Listener -
Settings - Devices - MQTT - Configure - Listen to a Topic
Enter "yourcustomname/Aircon/#"
Start Listening
Hi,
I have srf model and did everything as described. Steugled a bit with flashing esp 01, but i made it.
After connecting to the unit i got the subscription message on the broker and nothing else. I dont recieve any state or send any command.
Any idea? My model is described in the description as tested