PROJECT UPDATE

[rnd-ash]

I will unfortunately be putting this on hold for a bit...

I rebuilt my transmission (722.6) and during the process didn't put enough ATF in. That's all fixed now however the TCM is now in hard limp home mode.

During these difficult times, everywhere is shut, so I likely can't get it cleared using a dealer. So, I have a new project.

I have Xentry passthru on my laptop, however no adapter. Only my Arduino. So my new project will be to turn my Arduino into a J2534 adapter so Xentry can use it.

There are 2 new repos on my account for this project should you be interested. I will however come back to this project once that's fixed as I still have a lot planned for this!