Cannot use HardwareAccelerationDevice.Auto with ffmpeg 6.1.0
blfuentes opened this issue · 1 comments
blfuentes commented
Windows 1 22h2
.net 8 8.0.100
ffmpeg 6.1.0
ffmpegcore 5.1.0
I created a command line program that I use to convert from different formats to mp3 with ffmpeg.
It was working fine in 6.0.0 but since I've updated I get the following error for some files:
FFMpegCore.Exceptions.FFMpegException: 'ffmpeg exited with non-zero exit-code (69 - ffmpeg version 6.1-full_build-www.gyan.dev Copyright (c) 2000-2023 the FFmpeg developers
built with gcc 12.2.0 (Rev10, Built by MSYS2 project)
configuration: --enable-gpl --enable-version3 --enable-static --pkg-config=pkgconf --disable-w32threads
--disable-autodetect --enable-fontconfig --enable-iconv --enable-gnutls --enable-libxml2 --enable-gmp --enable-bzlib
--enable-lzma --enable-libsnappy --enable-zlib --enable-librist --enable-libsrt --enable-libssh --enable-libzmq
--enable-avisynth --enable-libbluray --enable-libcaca --enable-sdl2 --enable-libaribb24 --enable-libaribcaption
--enable-libdav1d --enable-libdavs2 --enable-libuavs3d --enable-libzvbi --enable-librav1e --enable-libsvtav1
--enable-libwebp --enable-libx264 --enable-libx265 --enable-libxavs2 --enable-libxvid --enable-libaom --enable-libjxl
--enable-libopenjpeg --enable-libvpx --enable-mediafoundation --enable-libass --enable-frei0r --enable-libfreetype
--enable-libfribidi --enable-libharfbuzz --enable-liblensfun --enable-libvidstab --enable-libvmaf --enable-libzimg
--enable-amf --enable-cuda-llvm --enable-cuvid --enable-ffnvcodec --enable-nvdec --enable-nvenc --enable-dxva2
--enable-d3d11va --enable-libvpl --enable-libshaderc --enable-vulkan --enable-libplacebo --enable-opencl --enable-libcdio
--enable-libgme --enable-libmodplug --enable-libopenmpt --enable-libopencore-amrwb --enable-libmp3lame --enable-libshine
--enable-libtheora --enable-libtwolame --enable-libvo-amrwbenc --enable-libcodec2 --enable-libilbc --enable-libgsm
--enable-libopencore-amrnb --enable-libopus --enable-libspeex --enable-libvorbis --enable-ladspa --enable-libbs2b
--enable-libflite --enable-libmysofa --enable-librubberband --enable-libsoxr --enable-chromaprint
libavutil 58. 29.100 / 58. 29.100
libavcodec 60. 31.102 / 60. 31.102
libavformat 60. 16.100 / 60. 16.100
libavdevice 60. 3.100 / 60. 3.100
libavfilter 9. 12.100 / 9. 12.100
libswscale 7. 5.100 / 7. 5.100
libswresample 4. 12.100 / 4. 12.100
libpostproc 57. 3.100 / 57. 3.100
Input #0, flac, from 'D:\test\04. Red Giant.flac':
Metadata:
ARTIST : Hippie Death Cult
TITLE : Red Giant
ALBUM : Helichrysum
DATE : 2023
album_artist : Hippie Death Cult
track : 4
TRACKTOTAL : 7
disc : 1
DISCTOTAL : 1
Duration: 00:04:47.67, start: 0.000000, bitrate: 910 kb/s
Stream #0:0: Audio: flac, 44100 Hz, stereo, s16
Stream #0:1: Video: mjpeg (Progressive), yuvj420p(pc, bt470bg/unknown/unknown), 1400x1400 [SAR 72:72 DAR 1:1], 90k tbr, 90k tbn (attached pic)
Metadata:
comment : Cover (front)
Using auto hwaccel type cuda with new default device.
Stream mapping:
Stream #0:1 -> #0:0 (mjpeg (native) -> png (native))
Stream #0:0 -> #0:1 (flac (native) -> mp3 (libmp3lame))
Press [q] to stop, [?] for help
[mjpeg @ 0000015b83cc1b80] decoder->cvdl->cuvidDecodePicture(decoder->decoder, &ctx->pic_params) failed -> CUDA_ERROR_INVALID_IMAGE: device kernel image is invalid
[vist#0:1/mjpeg @ 0000015b83cc19c0] Error submitting packet to decoder: Generic error in an external library
[swscaler @ 0000015b8cf21c40] deprecated pixel format used, make sure you did set range correctly
[vost#0:0/png @ 0000015b838bd5c0] No filtered frames for output stream, trying to initialize anyway.
Output #0, mp3, to 'D:\test\output\Hippie Death Cult - Helichrysum\04. Red Giant.mp3':
Metadata:
TPE1 : Hippie Death Cult
TIT2 : Red Giant
TALB : Helichrysum
TDRC : 2023
TPE2 : Hippie Death Cult
TRCK : 4
TRACKTOTAL : 7
TPOS : 1
DISCTOTAL : 1
TSSE : Lavf60.16.100
Stream #0:0: Video: png, rgb24(progressive), 1400x1400 [SAR 1:1 DAR 1:1], q=2-31, 200 kb/s, 90k fps, 90k tbn (attached pic)
Metadata:
comment : Cover (front)
encoder : Lavc60.31.102 png
Stream #0:1: Audio: mp3, 44100 Hz, stereo, s16p, 192 kb/s
Metadata:
encoder : Lavc60.31.102 libmp3lame
frame= 0 fps=0.0 q=0.0 size= 0kB time=00:04:46.98 bitrate= 0.0kbits/s speed=21.2x
[vist#0:1/mjpeg @ 0000015b83cc19c0] Decode error rate 1 exceeds maximum 0.666667
[mp3 @ 0000015b838b9d00] No packets were sent for some of the attached pictures.
[out#0/mp3 @ 0000015b838bbe00] video:0kB audio:6743kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 0.012484%
frame= 0 fps=0.0 q=0.0 Lsize= 6744kB time=00:04:47.66 bitrate= 192.1kbits/s speed=20.5x
Conversion failed!)'
And this is the code I use to generate that conversion (It's F#, but I think it's easy enough to understand...)
let getConversionOutputOptions (options: FFMpegArgumentOptions) (codec: string) =
match codec with
| "mp3" -> options.WithAudioBitrate(AudioQuality.Good)
.WithAudioCodec(AudioCodec.LibMp3Lame) |> ignore
| "ac3" -> options.WithAudioBitrate(AudioQuality.Good)
.WithAudioCodec(AudioCodec.Ac3) |> ignore
| "ogg" -> options.WithAudioBitrate(AudioQuality.Good)
.WithAudioCodec(AudioCodec.LibVorbis) |> ignore
| "avi" -> options
.WithVideoCodec(VideoCodec.LibX264)
.WithAudioCodec(AudioCodec.LibMp3Lame)
.UsingMultithreading(true)
.UsingThreads(System.Environment.ProcessorCount)
.WithAudioBitrate(AudioQuality.Normal)
//.WithVideoBitrate(5000) // reduction of ~85%. Around 50% with 25000
.WithFastStart()
|> ignore
| _ -> options.WithAudioBitrate(AudioQuality.Normal)
.WithAudioCodec(AudioCodec.LibMp3Lame) |> ignore
let getConversioInputOptions (options: FFMpegArgumentOptions) (codec: string) =
options
.WithHardwareAcceleration(HardwareAccelerationDevice.Auto)
.UsingMultithreading(true)
.UsingThreads(System.Environment.ProcessorCount)
|> ignore
let processFile (codec: string) (outputfolder: string) (inputext: string) (file:string)=
async {
printfn "Processing file '%s' ..." file
let outputFile = Path.Join([|outputfolder; (Path.GetFileName(file).Replace(inputext, codec)) |])
if outputFile.EndsWith(codec) then
let inputOptions = fun input -> getConversioInputOptions input codec
let outputOptions = fun options -> getConversionOutputOptions options codec
let processor = FFMpegArguments
.FromFileInput(file, true, inputOptions)
.OutputToFile(outputFile, true, outputOptions)
processor.ProcessSynchronously() |> ignore
else
printfn "Skipping file '%s' as its format is not the expected." outputFile
printfn "Processed! File saved to '%s' %s" outputFile System.Environment.NewLine
}
If I change the line .WithHardwareAcceleration(HardwareAccelerationDevice.Auto) switching to D3D11VA for example, then I get no exception.
As I said, it was working before with the ffmpeg 6.0.0, but checking the changelog I have no idea how to adapt my code leaving the hardware acceleration to auto (or is this a bad idea?)
version 6.1:
- libaribcaption decoder
- Playdate video decoder and demuxer
- Extend VAAPI support for libva-win32 on Windows
- afireqsrc audio source filter
- arls filter
- ffmpeg CLI new option: -readrate_initial_burst
- zoneplate video source filter
- command support in the setpts and asetpts filters
- Vulkan decode hwaccel, supporting H264, HEVC and AV1
- color_vulkan filter
- bwdif_vulkan filter
- nlmeans_vulkan filter
- RivaTuner video decoder
- xfade_vulkan filter
- vMix video decoder
- Essential Video Coding parser, muxer and demuxer
- Essential Video Coding frame merge bsf
- bwdif_cuda filter
- Microsoft RLE video encoder
- Raw AC-4 muxer and demuxer
- Raw VVC bitstream parser, muxer and demuxer
- Bitstream filter for editing metadata in VVC streams
- Bitstream filter for converting VVC from MP4 to Annex B
- scale_vt filter for videotoolbox
- transpose_vt filter for videotoolbox
- support for the P_SKIP hinting to speed up libx264 encoding
- Support HEVC,VP9,AV1 codec in enhanced flv format
- apsnr and asisdr audio filters
- OSQ demuxer and decoder
- Support HEVC,VP9,AV1 codec fourcclist in enhanced rtmp protocol
- CRI USM demuxer
- ffmpeg CLI '-top' option deprecated in favor of the setfield filter
- VAAPI AV1 encoder
- ffprobe XML output schema changed to account for multiple
variable-fields elements within the same parent element
- ffprobe -output_format option added as an alias of -of
blfuentes commented
I've found, that if I add the selectstream to the output options and get the Audio one, I can use the auto in hardwareacceleration...
.SelectStream(0, 0, Channel.Audio)
Why would be this?