Polar Ignite

Question

Polar Ignite

Opened this issue 5 years ago · 7 comments

Hi Roscoe, I'm wondering if you're still doing any work on this. I bought a polar ignite model, and unfortunately loophole doesn't seem to want to connect. If you have any thoughts on what I might try, I'd appreciate it very, very much.

Answer 1 · 2019-09-02T14:53:13.000Z

What are the error messages? I did not test it with Polar Ignite.

Answer 2 · 2019-09-25T01:16:34.000Z

Hi rsc-dev, sorry about the delay in responding! it is saying that no devices are detected. I'm wondering if there is a different protocol buffer file for the ignite.

Answer 3 · 2019-10-14T10:02:09.000Z

To be honest it might be very difficult to tell why it does not work. I do not have Ignite, so I cannot debug communication.

Answer 4 · 2019-12-29T17:01:53.000Z

Hello @rsc-dev, how did you do the debugging for the other devices?

Answer 5 · 2020-02-16T06:52:51.000Z

Hi rsc.dev, I found this comment on another polar github project (using Ruby rather than python) "Polar has changed the USB interface from HID to CDC ACM. I guess you can talk to the newer Polar watches on /dev/ttyACM0 instead (serial port for the device)" I'm wondering this is applicable to loophole,, and if so, what would be involved to make the switch. Thanks!!!

Answer 6 · 2020-02-16T10:18:53.000Z

Is that from cmaion?

Answer 7 · 2020-02-16T20:33:40.000Z

Yep, still on the hunt for a way to get the data off my polar ignite!