MP1: Wrong stages sync

Question

MP1: Wrong stages sync

rualark opened this issue 6 years ago · 9 comments

rualark commented 6 years ago

Answer 1 · 2019-03-15T18:45:09.000Z

rualark commented 6 years ago

Answer 2 · 2019-03-15T18:45:39.000Z

rualark commented 6 years ago

Answer 3 · 2019-03-15T20:45:09.000Z

I would even say more, these stages are shifted

Answer 4 · 2019-03-15T21:31:03.000Z

rualark commented 6 years ago

Answer 5 · 2019-03-15T23:37:51.000Z

Empty stages - separate issue.
There is no shift, but different length of tracks

Answer 6 · 2019-03-16T08:45:22.000Z

Stages have different length and some instruments last longer than toload_time=25

Endings seem to be synchronized due to stretching of stages to same visual width.

Answer 7 · 2019-03-16T09:55:26.000Z

There is no problem with MIDI stage files. They all end at 25 seconds:

This means that there is problem with combining stages. Stages seem to be stretched.

Answer 8 · 2019-03-16T10:03:16.000Z

Now lets look at stage3. This stage is first to have sounding notes. This stage finishes at correct time 0:25.
Stage 2 finishes at 0:29, which is 4 seconds later. It seems that stage 2 is stretched by 29/25 = 1,16. This ratio seems the same as 120 and 140 tempo.
I checked project rate and clip rate and they are 1.0

Answer 9 · 2019-03-16T11:04:59.000Z

It seems that I erroneously changed Reaper project tempo from 120 to 140 bpm