Installation fails on Debian
roukmoute opened this issue · 1 comments
roukmoute commented
Hi,
I've got this error:
➤ sudo apt install -fy ./rustdesk-1.1.9.deb
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Note, selecting 'rustdesk' instead of './rustdesk-1.1.9.deb'
rustdesk is already the newest version (1.1.9).
0 upgraded, 0 newly installed, 0 to remove and 139 not upgraded.
1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Setting up rustdesk (1.1.9) ...
Collecting pynput
Using cached pynput-1.7.6-py2.py3-none-any.whl (89 kB)
Requirement already satisfied: python-xlib>=0.17 in /usr/local/lib/python3.9/dist-packages (from pynput) (0.31)
Collecting evdev>=1.3
Using cached evdev-1.6.0.tar.gz (26 kB)
Requirement already satisfied: six in /usr/lib/python3/dist-packages (from pynput) (1.16.0)
Building wheels for collected packages: evdev
Building wheel for evdev (setup.py) ... error
ERROR: Command errored out with exit status 1:
command: /usr/bin/python3 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-lyzcybmn/evdev_4964f8205af749d8b09787673f47cb96/setup.py'"'"'; __file__='"'"'/t
mp/pip-install-lyzcybmn/evdev_4964f8205af749d8b09787673f47cb96/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.cl
ose();exec(compile(code, __file__, '"'"'exec'"'"'))' bdist_wheel -d /tmp/pip-wheel-2va8kfla
cwd: /tmp/pip-install-lyzcybmn/evdev_4964f8205af749d8b09787673f47cb96/
Complete output (29 lines):
running bdist_wheel
running build
running build_py
creating build
creating build/lib.linux-x86_64-3.9
creating build/lib.linux-x86_64-3.9/evdev
copying evdev/__init__.py -> build/lib.linux-x86_64-3.9/evdev
copying evdev/ff.py -> build/lib.linux-x86_64-3.9/evdev
copying evdev/events.py -> build/lib.linux-x86_64-3.9/evdev
copying evdev/evtest.py -> build/lib.linux-x86_64-3.9/evdev
copying evdev/eventio.py -> build/lib.linux-x86_64-3.9/evdev
copying evdev/device.py -> build/lib.linux-x86_64-3.9/evdev
copying evdev/uinput.py -> build/lib.linux-x86_64-3.9/evdev
copying evdev/ecodes.py -> build/lib.linux-x86_64-3.9/evdev
copying evdev/util.py -> build/lib.linux-x86_64-3.9/evdev
copying evdev/eventio_async.py -> build/lib.linux-x86_64-3.9/evdev
copying evdev/genecodes.py -> build/lib.linux-x86_64-3.9/evdev
running build_ext
running build_ecodes
writing ecodes.c (using /usr/include/linux/input.h /usr/include/linux/input-event-codes.h /usr/include/linux/uinput.h)
building 'evdev._input' extension
creating build/temp.linux-x86_64-3.9
creating build/temp.linux-x86_64-3.9/evdev
x86_64-linux-gnu-gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -ffile-prefix-map=/build/python3.9-RNBry6/python3.9-3.9.2=. -fstack-protector-strong -
Wformat -Werror=format-security -g -fwrapv -O2 -g -ffile-prefix-map=/build/python3.9-RNBry6/python3.9-3.9.2=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FO
RTIFY_SOURCE=2 -fPIC -I/usr/include/python3.9 -c evdev/input.c -o build/temp.linux-x86_64-3.9/evdev/input.o -std=c99 -Wno-error=declaration-after-statement
evdev/input.c:10:10: fatal error: Python.h: No such file or directory
10 | #include <Python.h>
| ^~~~~~~~~~
compilation terminated.
error: command '/usr/bin/x86_64-linux-gnu-gcc' failed with exit code 1
----------------------------------------
ERROR: Failed building wheel for evdev
Running setup.py clean for evdev
Failed to build evdev
Installing collected packages: evdev, pynput
Running setup.py install for evdev ... error
ERROR: Command errored out with exit status 1:
command: /usr/bin/python3 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-lyzcybmn/evdev_4964f8205af749d8b09787673f47cb96/setup.py'"'"'; __file__='"'"'
/tmp/pip-install-lyzcybmn/evdev_4964f8205af749d8b09787673f47cb96/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.
close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /tmp/pip-record-c9_nells/install-record.txt --single-version-externally-managed --compile --install-headers /usr/
local/include/python3.9/evdev
cwd: /tmp/pip-install-lyzcybmn/evdev_4964f8205af749d8b09787673f47cb96/
Complete output (28 lines):
running install
running build
running build_py
creating build
creating build/lib.linux-x86_64-3.9
creating build/lib.linux-x86_64-3.9/evdev
copying evdev/__init__.py -> build/lib.linux-x86_64-3.9/evdev
copying evdev/ff.py -> build/lib.linux-x86_64-3.9/evdev
copying evdev/events.py -> build/lib.linux-x86_64-3.9/evdev
copying evdev/evtest.py -> build/lib.linux-x86_64-3.9/evdev
copying evdev/eventio.py -> build/lib.linux-x86_64-3.9/evdev
copying evdev/device.py -> build/lib.linux-x86_64-3.9/evdev
copying evdev/uinput.py -> build/lib.linux-x86_64-3.9/evdev
copying evdev/ecodes.py -> build/lib.linux-x86_64-3.9/evdev
copying evdev/util.py -> build/lib.linux-x86_64-3.9/evdev
copying evdev/eventio_async.py -> build/lib.linux-x86_64-3.9/evdev
copying evdev/genecodes.py -> build/lib.linux-x86_64-3.9/evdev
running build_ext
ecodes.c already exists ... skipping build_ecodes
building 'evdev._input' extension
creating build/temp.linux-x86_64-3.9
creating build/temp.linux-x86_64-3.9/evdev
x86_64-linux-gnu-gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -ffile-prefix-map=/build/python3.9-RNBry6/python3.9-3.9.2=. -fstack-protector-strong
-Wformat -Werror=format-security -g -fwrapv -O2 -g -ffile-prefix-map=/build/python3.9-RNBry6/python3.9-3.9.2=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_
FORTIFY_SOURCE=2 -fPIC -I/usr/include/python3.9 -c evdev/input.c -o build/temp.linux-x86_64-3.9/evdev/input.o -std=c99 -Wno-error=declaration-after-statement
evdev/input.c:10:10: fatal error: Python.h: No such file or directory
10 | #include <Python.h>
| ^~~~~~~~~~
compilation terminated.
error: command '/usr/bin/x86_64-linux-gnu-gcc' failed with exit code 1
----------------------------------------
ERROR: Command errored out with exit status 1: /usr/bin/python3 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-lyzcybmn/evdev_4964f8205af749d8b09787673f47c
b96/setup.py'"'"'; __file__='"'"'/tmp/pip-install-lyzcybmn/evdev_4964f8205af749d8b09787673f47cb96/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace
('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /tmp/pip-record-c9_nells/install-record.txt --single-version-externally-managed
--compile --install-headers /usr/local/include/python3.9/evdev Check the logs for full command output.
dpkg: error processing package rustdesk (--configure):
installed rustdesk package post-installation script subprocess returned error exit status 1
Errors were encountered while processing:
rustdesk
E: Sub-process /usr/bin/dpkg returned an error code (1)➤ uname -a 100 ↵
Linux Travail 5.10.0-17-amd64 #1 SMP Debian 5.10.136-1 (2022-08-13) x86_64 GNU/Linuxroukmoute commented
Ok I haven't full python :
sudo apt install python3-devNow it works!