[Lesson04] Raspberry Pi 4 Model B Make error
jeremypbrien opened this issue · 4 comments
After changing the PBASE to 0xFE000000 for the raspberry pi 4 model B, I get the following error when running make:
build/boot_s.o: in function 'el1_entry':
(.text.boot+0x44): relocation truncated to fit: R_AARCH64_ADR_PREL_LO21 against symbol 'bss_end' defined in .bss section in build/kernel8.elf
make: *** [Makefile:30: kernel8.img] Error 1
Lessons 1-3 work, but all other lessons are getting this error. Is there a workaround to make these lessons work for the raspberry pi 4 model B?
Try changing this line:
https://github.com/s-matyukevich/raspberry-pi-os/blob/master/src/lesson04/src/boot.S#L41
It should be:
mov sp, #LOW_MEMORY
Not sure why lesson04 changed it since lesson05 still has it using #LOW_MEMORY
I got the same error, and I don't know what I should do. I already tried to add #LOW_MEMORY, but that doesn't change anything. It could be because #LOW_MEMORY is the same as #(2 * SECTION_SIZE).
Hi, I got the same error, and found that in my case the line static unsigned short mem_map [ PAGING_PAGES ] = {0,}; in mm.c causes the bss section to be too large, exceeding the pc-relative addressing limit in the line adr x1, bss_end in boot.S. I changed mem_map's type to uint8_t and it compiled successfully. Caution this may not be the exact cause of your compilation error because I have set my LOW_MEMORY and HIGH_MEMORY differently (0x40000000 to 0xFC000000).
About this problem,we can use size cmd to check build/*.o file .bss section whether size is normal. for my problem, i foundmm_c.o .bss section size is too big , which means uninit var is too big